|
|
| Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
 |
|
|
|
|
|
Since the 2007-2008 alchemic music season and consequentially live FM season was over (the event I marked with my “End of the live Phonostage”) I have been spinning a lot of vinyl lately. So, I spent some time with different phono cables with my diff...
|
|
friday we had a good test , we use Roon Labs software.tone was very similar in both CEC and Berkeley but i am not sure about our system tone resolution because we connected a push-pull amplifier to 2way living voice speaker.in our test Berkeley was g...
|
|
Yep, I fixed it. If does sound very good now, exactly how it has to be. It turns out that my suspicion were correct: my Micro’s fat cable has died on me. I absolutely assure you that no one would believe that a regular phono cable able to introd...
|
|
Thanks, Clark, I will go with regular commercial Romex. There is no such a thing as “specialty AC cable” and the thing that they write about their cable is crap in my estimation. “Our custom high-end Power AC In-wall cable is a 10 AWG (5.27 mm2), spe...
|
|
Here we go, I will be telling you that I am looking or that I have found the “best” cable to use for bass channel? Sound like a stupid thing to tell you and sound like a stupid thing to read at my site. Still, I will be obnoxious enough to insist...
|
|
When I said “cable” then I meant whatever cable might mean, the sonic qualities and whatever comes with it. You cartridge with it 2mV drives a cable to a transformer, for instance 1M that has impedance, capacitance and so on. The transformer has 26dB...
|
|
[quote user="glaesemann"]Roman in a few posts you have made reference to the interesting topic of cable current loading. I'm keenly interested in your findings.[/quote]
Glaesemann, there is not a lot to talk about it. My observation showed that prac...
|
|
In response of me mentioned the Synopsis cable above and over the years, since at “My Playback” page I mentioned the Synopsis I got a number of emails asking what the hell this mysterious cable is and why if it is so good it never made the inflames A...
|
|
In response of me mentioned the Synopsis cable above and over the years, since at “My Playback” page I mentioned the Synopsis I got a number of emails asking what the hell this mysterious cable is and why if it is so good it never made the inflames A...
|
|
N-set, before you wrap the signal wires with PTFE tape, I should mention that I have had some PTFE "tubing" on hand for quite a while, for "tubular" shield spacing, if I ever actually do it. I should also point out that most decent shielded IC has s...
|
|
Strange but I have found that my reception is significantly better if I don't use any connector between my antenna cable(radio shack RG whatever going up to rooftoop antenna) and my tuner but instead just strip off a bit of wire at the end of the cab...
|
|
I set up one of my TU-X1 to work from own front end and from Schwarz via high quality relay. It very convenient – push a button and the front-end switched. Everything is well shielded, there are no noises and everything is very nice. What however sur...
|
|
If I succeed to make my midbass horn at attic then I will face another problem that I do not know how to address at this point. The horns will be powered from Melquiades bass channels – it means it will use a good 70 feet speaker cable. If I go with ...
|
|
Hmmm, this is interesting. Is it your opinion then that if someone but Dominus on a cable cooker it could be ruined? This would affect trying 1990's Rev. A & B in my system because they can only come from used market and it would be unknown how they ...
|
|
Here we go, I will be telling you that I am looking or that I have found the “best” cable to use for bass channel? Sound like a stupid thing to tell you and sound like a stupid thing to read at my site. Still, I will be obnoxious enough to insist...
|
|
Yesterday arrived the Belkin Synapse cable. I have been listening this afternoon some music, and I'm surprised how this 6ft piece of wire has been able to remove the high frequency crap. Clean, coherent, no false detail anymore... I believe it affect...
|
|
We have no access to Belkin Synopsis SPDIF cable (Romy use it in his system) and we are not sure how new Kharma digital cables sounds?
we had a test between two Purist Digital cables . Purist Anniversary 4600$ and Purist Neptune 1500$ SPDIF Ca...
|
|
Paul
yes , for reflection of waves the cable length is important , Art U-Byte cable is 2.5m and they do not make under 2.5m cable.
the BNC connectors are 75 ohm but most company use RCA connectors.
i know about them but my test proved me...
|
|
You can see a few clips on YouTube with Hans Deutsch implementations.
Obviously, it is not the opportunity to experience Sound but the fact that it was
demoed on very unfortunate equipment and regrettable music is not pleasant. I also do not like ...
|
|
How much for an audiophile version?...
|
|
That's a lot of cable. Where do you hang it?? And doesn't that roll off the sound? Although maybe the Bose artificially inflates what is rolled off etc. Audio is one of the few places where two wrongs can make it right....
|
|
Adrian, can you confirm whether you were using cable with shielding or without? Like you I had the buzzing go away when on battery or without PP2000 in system. It became dead silent. Then with PP2000 back in system there was buzzing. I went to all sh...
|
|
Playing was various 3 feet long cable between my tuners frond end and AMX decoder my memories about my former cables idea got revised. That lead me to feel that I might not perceive as horribly and I did before an idea to make my own cable. In the pa...
|
|
[quote user="Romy the Cat"]If I succeed to make my midbass horn at attic then I will face another problem that I do not know how to address at this point. The horns will be powered from Melquiades bass channels – it means it will use a good 70 feet s...
|
|
I do not think Genn is close to an answer, he spent too much time to read the Lehnitsky’s brain-massage that made him to feel this way.
I am sure that there are some kinds of very pragmatic, predicable and manageable explanations for the effect that...
|
|
Adrian, I've put what you'd probably call a flat Romex: 5x6mm2 solid +2x6mm2 solid +1x16mm2 stranded for gnd.All bundled and burried in a channel, chiseled in my walls close to the ceiling, so that it's far away from my householdcabling....
|
|
I know that some of you might consider it as a dangers subject and if you afraid of yourself then do not read any further. This view has no direct relation to the subject of my site, namely: “advanced audio and evolved music reproduction techni...
|
|
I think considering carbon cables for limited frequency range is not a bad idea.van den hul have some carbon cables, they never improved their carbon cable but current models in my idea have a good sound.carbon have some restriction but in a proper c...
|
|
In the past you've referred to current loading in the context of cable length. I recently experienced this when I experimented with moving my amps. I needed to increase the IC length from 1 meter to 3 meters. The only IC I had at that length was an o...
|
|
[quote user="Romy the Cat"] I do not think that the fluid is a big deal. I think the fluidness of the isolation is the key, I would use different liquid. In my past I tried silicon and Scotch Whisky and the result was very good. Would it be possible ...
|
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
|
Last 24-hours posts: |
3 |
|
 |
|
|
Total human visitors: |
43,285,191 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capricornus, Samuel Friedr»
|
|
Gade, Niels Vilhelm (22 Fe»
|
|
Fibich, Zdenek (21 Decembe»
|
|
Coates, Eric (27 August 18»
|
|
Champagne, Claude (27 May »
|
|
Nassi, Thomas (2 March 189»
|
|
Zappa, Frank (21 December »
|
|
Henneman, Ig (21 December »
|
|
Camilleri, William (21 Dec»
|
|
Zagar, Peter (21 December »
|
|
|
|
|
|
|