|
|
| Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
 |
|
|
|
|
|
[quote user="Romy the Cat"]Actually it turned out that LE5-2/2105 are much more complicated driver and to sound right it need way more complex crossover then juts a band-pass the I initially unused. I spend some time with it today but did not find a ...
|
|
[quote user="Romy the Cat"]Funny I thought that that for MiniMe it would not be so critical but as soon I plugged the DEQ-2496 in MiniMe pass I have heard that depersonalized DEQ sound.[/quote]It is funny how some people seem to not hear this at all ...
|
|
So, you use DCX 2496 for deals but not for crossovering and your crossovers are still on analog domain, right? Romy, I do everything in the digital domain so I use DCX 2496 as my crossover as well (but analog SS pro amps). I know you're no big fan of...
|
|
Hello Romy,I didn't use John Hasquin's tapped horn design, I modeled my own in hornresp for my TAD woofer. I knew I would only need it up to ~55Hz so I was happy to have it flat from 23Hz-70Hz. The lowest crossover point for Behringer DCX 2496 is 20H...
|
|
I am in the process of setting up a DAW to record fm broadcast. Recently I installed a M-Audio 2496 DAC in a computer to do the recording. I am using a Yamaha T-85 tuner. Prior to routing the i.c. cables through the DAC I had no background noise f...
|
|
[quote user="Romy the Cat"]audiofilofine, you need to form a question in a format that would indicate you do the your do some homework. To bulb or even to design 20Hz horn is complex task and it usually made to the specifics of the given circumstance...
|
|
[quote user="Romy the Cat"]Funny I thought that that for MiniMe it would not be so critical but as soon I plugged the DEQ-2496 in MiniMe pass I have heard that depersonalized DEQ sound.[/quote]It is funny how some people seem to not hear this at all ...
|
|
[quote user="Kcct82"] I know you're not a big fan of digital delay, but I'm using behringer DCX 2496 to make things easier... this way I get to keep all horn mouths on the same plane which avoids some reflections (from other horn mouths). [/quote]
S...
|
|
Hi Josh! That was basically my idea too. Although I read that the 12 inch driver loses directivity after 750. But I played around with Behringer dcx 2496, and I had the impression, that 1200 second order was the best sounding. The main reason for cro...
|
|
[quote user="Romy the Cat"]You would not need any “special” A/D converters, as I did impose any demeaned to “quality”. All you that you need to have a more or less reasonable tuner, a good antenna, strong reception and an ability to write it up at 24...
|
|
.... in home systems for Room correction and general system EQFolks,This is from my own Yahoo group, but may be of interest here....Since writing this I have in fact changed my speakers to dipoles and do not currently use a PADEQ (it will return thou...
|
|
[quote user="Kcct82"]I didn't use John Hasquin's tapped horn design, I modeled my own in hornresp for my TAD woofer. I knew I would only need it up to ~55Hz so I was happy to have it flat from 23Hz-70Hz. The lowest crossover point for Behringer DCX 2...
|
|
[quote user="Romy the Cat"]Actually it turned out that LE5-2/2105 are much more complicated driver and to sound right it need way more complex crossover then juts a band-pass the I initially unused. I spend some time with it today but did not find a ...
|
|
I think this subject should be collected in its own thread. It is interesting that both Romy and I have just got the Behringer DEQ 2496 to try in our systems, so hopefully there will be some data to report here.
It was previously said that the DE...
|
|
[quote user="op.9"] One thing nobody has mentioned is using the room’s corners. Is this a no no? I’ve been trying use McBean to model a horn exiting into the corner – with a middle ‘mouth’ about 1m squared - and using a conical approximation as the r...
|
|
Very good, thanks for the images. It would be very interning to learn what the bandwidth of the horns, the bandwidth of the drivers and the specificity of crossovers you eventually chose to use with each channel. It might take for you for a while to ...
|
|
Hi,[quote user="Romy the Cat"]This subject of digital crossovers became quite popular during last few years and many audio-people give up and go for a simplicity and painlessness of digital crossovering.[/quote]Well, digital X-Overs would appear to o...
|
|
[quote user="jtavan"] I would be interested to hear your reaction to the same CD ripped properly on a CD-ROM drive rather than recorded from SPDIF stream. If your transport is VERY good, they should be equivalent... but on damaged discs, or with bad ...
|
|
I would be interested to hear your reaction to the same CD ripped
properly on a CD-ROM drive rather than recorded from SPDIF stream. If
your transport is VERY good, they should be equivalent... but on
damaged discs, or with bad transports, the err...
|
|
Somebody "KCCT82" from Devil Audio site posted information about own installation.
Channels:
TAD ET-703 compression driver <12k-20k> (107db 8 ohms)TAD TD-4002 compression driver on 400hz tractrix <1.9k-12k> (110db 16 ohms)GOTO...
|
|
wow. So much to digest here.
Further thoughts.This is where I’m at.
It
seems that I don’t have the space for optimum straight horns exiting directly
onto the listening position as per Romy’s diagram. And besides,...
|
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
|
Last 24-hours posts: |
3 |
|
 |
|
|
Total human visitors: |
43,285,191 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capricornus, Samuel Friedr»
|
|
Gade, Niels Vilhelm (22 Fe»
|
|
Fibich, Zdenek (21 Decembe»
|
|
Coates, Eric (27 August 18»
|
|
Champagne, Claude (27 May »
|
|
Nassi, Thomas (2 March 189»
|
|
Zappa, Frank (21 December »
|
|
Henneman, Ig (21 December »
|
|
Camilleri, William (21 Dec»
|
|
Zagar, Peter (21 December »
|
|
|
|
|
|
|