| RonyWeissman wrote:|
|Romy, would you say that placette is especially sensitive to electricity to function at it's best(sensitive in relation to other equipment I mean)? My unit is 110v and I am in 220v world, so I am using a step-down transformer on the unit. I have had very good results using this step-down with other equipment so the problem is not the quality of the transformer. |
Well, this is a very complicated question, so complicated that I do not have not only a definitive answer but even a definite opinion on the subject. Let talk about it.
I have been using Placette for a while and was trying to answer the question how the electricity that powers the output buffer affects sound. In some cased I have seen that it affects hugely and other case it was less affective. The reason for this I think that any given days the reason why the electricity sound bad is changes day by day, location by location etc. For instance a have in my closet an army of regenerators, isolation transformers, filters, resonator filters etc. When electricity was bad I was trying to use them on separate elements of on the selected group elements. In some case I had truly phenomenal success. For instance when electricity has a very bad day and you take some kind isolation transformer or regenerator, connect it to you phonostage or to your Placette and have a fantastic improvement then you presume that your phonostage or your Placette is very sensitive to electricity. However, the next day the sound turn bad and the location of your isolation transformer or regenerator are not effective anymore. Even worse: you have better elective day and you realizes that your isolation transformer or regenerator sound words then the phonostage or Placette driver directly from your walls. I have what I described above many-many-many-many times and I even had a Excel spreadsheet where I was trying to mark the results and to catch a patter. I was not able to as it was totally random pain in ass behavior – at least at my location.
A couple years back I asked Guy to beef up the Placette’s Power supplies. I do not remember exactly what we did, I think we put Schottky diodes in there and big ass caps. If I am not mistaken we pout in Placette 4 by 220.000uF capacious – the biggest that I was able to find for the size that could fit in the box. I feel it did affect the sensitive of my Placette to electricity. It did not resolve the problem but it changed the non-existing patter to have slightly better odds against electricity. Then I went with APS that have changed my ways of dealing with electricity. The APS has its own perks, which is not the subject of this thread, but the odds with APSed Placette are way in different coordinate scale.
I do not know what the general situation with electricity in your place. Hey, it is even a different continent, not only the different country! Whatever you it looks like you have two series transformers in there – one from 220V to 120V and another is the Placette’s internal from 120V to 12V. First of all I think that Placette’s internal transformer might have two primaries and you can switch them. In any case, the internal transformer that Placette uses is very small and very common- it shall not be hard to replace them to 220V – those blue PC-mount transformers are $25 each and shall be widely available. If you keep the Placette as it as has a separate step down then it might be a good idea to make the step down transformer as an isolator transformer, implementing in there the double Faraday shields and etc. It might be effective but there is a bitch in this – you will not be able to recognize when your isolator works well when it screw up sound. I would have a few steps down of deferent type and would see what works and if the effectiveness of them will wary.
Probably Guy himself will be the best person to evaluate what you might do but there is a problem in Guy’s advice. I have no problem with Guy listening expertise but when I was looking at Google map then looked like Guy’s house is located right next to a large Idaho mountain massive. The whole town of Boise where Guy lives is located between Boise Mountains and Owyhee Mountains – that is beautiful rural district that has not a lot of people in there and not a lot of industrial polluters. Not to mention that Idaho and the neighboring states of East Oregon, Nevada, Utah, Montana and Wyoming are not the most populated to begin with. Look at the shot from the space:
….there is not a lot light density where Guy lives. So, I might only presume that the electricity situation in Guy’s home is VERY different from the downtown of Boston or downtown of Paris. The Cat
"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche