06-21-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 1 Post ID: 27128 Reply to: 27128 Macondo 3.0 I cannot imagine that I started to work on Macondo over 20 years ago. How are all this time the Macondo axioms coupled with Milq DSET proved to be quite accurate and constantly delivered quite good predictable results. Yes, it is a pain in the ass to maintain 14 channels. But if I discipline myself and once a month undergo my audio hygiene ceremony, when I verify that old channels are properly calibrated, that it is not a big deal. There was one event two years ago, over the duration of a week or two, then passivly loaded Tannoy Red driven by VFet through a truly mind-boggling performance, in fact the best that I ever heard in Audio. That made me literally to trash  Macondo and to go for exploration of the Dannoy options. One of the greatest discoveries of that project was that Red damped by Sunspeak passive suspension reduces olon over-exaggerated colors. However all my experiments to repeat this initial amazing result failed. I was able to get some interesting results but the dynamic limitations always kicked in and as with everything else, if you acknowledge it, then you cannot live with it. So, starting from yesterday how to turn my Macondo and Milq back to my listening room. However to have just my Macondo/Milq tandem is not enough for me and I want some part of the Dannoy effect, predictably and fully controlled.  I would like to make Macondo to love me in the way how Dannoy did it 2 years ago. It was absolutely amazing combination of integrity and humility that my old Macondo was not able to deliver. I will cover in this thread the progression of my experiments. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-21-2023 Post does not mapped to Knowledge Tree anthony Posts 338 Joined on 08-18-2014 Post #: 2 Post ID: 27131 Reply to: 27128 Subscribed The more I get out and listen to other systems the more I appreciate Macondo/DSET mainly for the life-like dynamics offered.  I am also sure that many of the people that listen to my version are unable to grasp just how dynamic the sound is compared to what they are used to...it takes time to appreciate.  They use other descriptors like resolution, detail etc. but it all comes back to dynamics. Can't wait to see what you come up with for Macondo 3.0 Romy.

06-21-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 3 Post ID: 27132 Reply to: 27131 A tweeter Might I ask you what tweeter you use withy your Macondo and how you dive it?  "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-21-2023 Post does not mapped to Knowledge Tree anthony Posts 338 Joined on 08-18-2014 Post #: 4 Post ID: 27133 Reply to: 27132 Also a RAAL It is a RAAL Lazy Ribbon with the integrated transformer doubling as DSET OPT.  Surprisingly, I started with a 4th order high pass filter which has steadily migrated back to first order...and it works. Next step is to trial a biradial horn for a bit more loading at the lower knee and to clean up dispersion a little (I think it will be audible), like these, but black...

06-22-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 5 Post ID: 27134 Reply to: 27133 Will do a vidio soon. At the bottom of your RAAL you have Vitavox S2 driver with no lowpass filter, right? Do you have an alternator between Milq and S2? If you do, then the alternator has some inductance and acts and a very mild filter. Anyhow. I disagree with RAAL and low order filter, and with horn loading RAAL but it is not my playback, and you certainly can do whatever you want. I probably need to record a video when I run my mouth about my ideas for Macondo 3.0 as it is too long time to write. Will do it soon. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-22-2023 Post does not mapped to Knowledge Tree Amir Iran Tehran Posts 347 Joined on 02-11-2009 Post #: 6 Post ID: 27135 Reply to: 27133 Subscribed Reading this topic every day to learn how it is possible to have both "Dannoy effect" and "ultra dynamic and transparent" sound in one system is interesting to me, actually I always told we need to have two different audio systems, one emotional system and other Macro system. What I think is to have both sides in one audio system is not easy, What I mean is we get A at expense of giving B. www.amiraudio.com, www.hifi.ir

06-23-2023 Post does not mapped to Knowledge Tree anthony Posts 338 Joined on 08-18-2014 Post #: 7 Post ID: 27136 Reply to: 27134 Frequency response Yes, a cheap inductive l-pad between OPT and S2 in midrange channel.  Interestingly, the frequency response of the first order Lazy Ribbon is remarkably similar to a response you posted somewhere on this site of the Water Drop with third order filter...really similar in the low end.  I think I can do better with the Lazy Ribbon as I still have a slight but broad dip in the frequency response between where the S2 signs off and the RAAL picks up which the horn loading may or may not alleviate without having to lower the high pass filter from circa 10k to say 8k (and all the troubles that may bring).  Worth a shot. In hindsight I wish I had also tried the T500a MKII or MKIII, but not so easy when the RAAL transformer doubles as the OPT.

06-23-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 8 Post ID: 27137 Reply to: 27134 I think it is nor 3.0 but 2.0.... here we go. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-24-2023 Post does not mapped to Knowledge Tree anthony Posts 338 Joined on 08-18-2014 Post #: 9 Post ID: 27138 Reply to: 27137 Fricken laser beams Romy, sad to hear of your separation.  I hope you are ok. I use one of these to align my horn stacks... ...simple to use, just put it on a camera tripod and wind it up and down to verify the horn pairs are at the same level or the stack is properly aligned longitudinally.  Sounds like you could have used one for the shed (ha!).  You could use REW (free software) and a relatively inexpensive unit like a Scarlatti 2i2 with a calibrated microphone to align your channels...perhaps easier and more accessible than using Bills Trinnov. Do you know the sensitivity of the Tannoy Red tweeter?  The RAAL Lazy Ribbon is supposed to be 111dB/w/m and it still runs flat out with no attenuation just the losses through a first order filter.  A higher order filter requires has more losses and I have to then attenuate the midrange S2 to compensate.  The Water Drop at 117dB/w/m? has a whole 6dB more loss to support a higher order filter which is fantastic, but I can't see how the Red tweeter is going to be anywhere near that sensitivity...hopefully I am wrong.  That is probably why you are considering the Yamaha amplifiers. You may have picked up that I am also not 100% happy on the sound of my tweeter.  It does sound very good, certainly right up there quality wise, but the room measurements show that I have a minimally delayed reflection in that top octave that I've not spent the time to track down and sort out, as well as needing to fill a shallow but broad droop in the upper frequency response which the biradial horn may help.  However, compared to the rest of the horn stack it seems that the highest frequencies are slightly flatter, or slightly slower than midrange and down.  That is probably not a useful commentary.  Describing physical experiences is often difficult, but perhaps I am starting to understand what you mean about Macondo "not loving you".  My fingers are crossed that the biradial horn for the ribbon and the chasing down that early HF reflection will put my mind at ease...but maybe not. The HF channel brings a LOT to the overall sound, more than I ever would have credited.  I listened a long time without it connected (many months) trying to understand the horn stack below those frequencies and I had a very nice sound, but the ribbon brings brought so much more.  Adding a DHT second stage to the HF channel for a little more gain has crossed my mind in part because of what the channel actually adds to the sound.  My consideration had been to maybe limit it to 2.5V DHT's because much of the wiring etc. is already in place for the tube socket and the YO186 (4V) is going nowhere. Anyway, those are my thoughts so far.  I am sure there were more things I wanted to bring up when watching your video, but alas they are nowhere to be found right now.

06-24-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 10 Post ID: 27139 Reply to: 27138 To be continuing for sure. Actually, I used laser BMS multiple times, and I found it completely useless. Yes, I perfectly can set up my horns with laser us and down or left and right, but I found that and my new difference, if one of the corns will be even inch higher or lower does not make too much difference. What I am after is to align the axis of the horns, and to assure that two horns are complete parallelism.  I cannot do it this a laser pointer with high degree of precision. When I installed my laser pointer at listening position and tripod, my laser point has very high-quality range Finder, I can mark exactly position of the laser point at the right and left horn of the same channel. Then, When I angle the horn at let's say 1 degree in any direction. The position of the laser pointer moved very slightly. I was using an extension method, taped, a mirror and reflected the laser pointer to another wall, and this way I had March larger of laser point movement in case I angle the horn. But this method seal does not give me that assurance that the horn pointed directly to two specific reference location. This way I can align right and left channels to be pointed relative to each other in the same direction but it will not be assurance that their horns pointed to the best position as a reference baseline. In case I use multiple channels on right and left it is very lengthy ceremony two find all proper right left and up and down deviation of laser point reflection. I did it in the past and I still believe it is the wrong way to do it as there is absolutely no assurance that my mirror between channels will be attached perfectly 3D perpendicular to the horn axes. It is not a baffled loudspeaker and there is no reference vertical surface on the horn to attach the mirror. Regarding sensitivity. I have no idea what is the Red’s sensitivity. I guess I can measure it and I might do it. What however I think it's important to understand, at least the way how I see it, that 100Db sensitivity with ribbon and 100DB sensitivity with RED are different animals in my view. The sensitivity is like a winter sun, it shines but it does not produce warms. They kind of have an intellectual satisfaction by feeling that high sensitivity assures dynamic range but there is something more sinister with this and I do not know what it is. It does not feel dynamic or to put it better its produces different type of dynamics which for whatever reason flushed you with water but you are still thirsty. It is possible that I have not the best experiences because I drive in with SET. When I was choosing loading of my Water Drop Twitter I was mostly driven by measurements, proper integration with S2 and overall proper performance. I think at that time I did not have my subjective perception is high and the scale of my reference points as I have now. It is fair to say that later things change over the last 20 years, :-) Yes, I agree that measurement wise ribbons are spectacular but as Lamm used to teach me: if you measurements are not aligned with your subjective perceptions then you measure wrong things. I do not have the technical expertise to dig deeper into ribbons measurements. Also it is not my objective to discover Truth about ribbons. All the time need to find proper high frequency transducing for this specific system to satisfy my personal very subjective perception. It is very important to note that the problem I'm trying to address, namely “Macondo doesn't love me” in reality does not even relate to twitters. At this point I just choose the twitters as a “guilty” party and I am trying to address one hypothesis at time. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-24-2023 Post does not mapped to Knowledge Tree Paul S San Diego, California, USA Posts 2,658 Joined on 10-12-2006 Post #: 11 Post ID: 27140 Reply to: 27137 On Your Own Again Wow, Romy, what a fraught time! You seem to have (somehow) focused on your sound system and narrowed things down to a tweeter, or at least some viable way to add "color". While you were talking, I was thinking that your S2s actually go pretty high, maybe over 15k Hz, right? I always had the opposite problem, with (colorful) paper tweeters that trailed off, and I added 'stats, then ribbons for that effect. I have mentioned here that I always thought that "ribbon manufacturers" "lied" about the ribbon efficiency, but now that you complain about ribbon efficiency, too, I realize that whatever the efficiency turns out to be, it's only the effects that I care about. Testing transducers can take a while! Add tube/amp/X/O sound qualities to the mix and you might have a real Project on your hands! Good Luck, Paul S

06-24-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 12 Post ID: 27141 Reply to: 27140 Welcome home, Romy! I setup on Macondo/Milq back by the calibration sheet and tine up all channels. The system up and running with perfectly trained obedient sound. I like it. There is no tweeter and no ULF The midbass is running with first order filter at 78Hz, in this new larger bin enclosure I need to revise it perhaps. Add the Red driver driven by B3. The B3 is rolled down probably 50DB down. The Red runs own default crossover and +3dB HF output. There is absolutely no lost of dynamics the I can detect, in fact it scares how good dynamically, truly scare. The Reds and S2 are NOT time aligned yet. There is a problem however, as good as Red wonderful atop it has one color and own presentation style that I detect, and I do not like it ever presentnees.  The Dannoy did not have. I wonder why. The leading hypothesis the something In the Dannoy’s bass make the Redness of Tanoy to be more controlled…. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-25-2023 Post does not mapped to Knowledge Tree Amir Iran Tehran Posts 347 Joined on 02-11-2009 Post #: 13 Post ID: 27142 Reply to: 27141 Some points I never listened to DSET/Macondo so I can not comment about the system but to have better love some ideas come to my mind. In my opinion "more emotion" comes from these area: 1- Tone beauty and tone coherency (amplifiers are important in this area but every audio element in the chain like DAC or Speaker driver or ... all have have their own tone) , many Japan audio designers prefer more simple/minimal designs to have better tone. 2- Micro dynamics  in part 1 (Tone) if the "AC Quality", "Acoustics" and "speaker position" all are Perfect then I think after changing the Ribbon twitter the next step could be considering matching of power amplifier output stage and Speaker Drivers. DSET is more complex than SET. in part 2 (Micro dynamics) I think the PSU design of power amplifier is important. www.amiraudio.com, www.hifi.ir

06-25-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 14 Post ID: 27143 Reply to: 27141 The latest plans 1)      Found a way to center Red drive in the frame and to align the axis of the red driver with midrange S2 driver. It is not so simple as it might appear. 2)      Spend a week or two to listen the new room and learning what this new room does. Certainly, the current position of the speaker snot when they will be, it is pretty much a storage position. they will be moving way into the room. 3)      Disconnect Red’s driver LF coil, testing the hypothesis that the coloration coming from LF cone’s Doppler. 4)      Trying to drive S2 driver from B3 amplifier directly, with no HF filtration of any kind, very curious about the result. Yes, the idea to drive the whole Macondo from B3 with passive filters did cross my mind. I am not there yet. I would like to succeed with what I know and THEN to experiment with what I do not know. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-25-2023 Post does not mapped to Knowledge Tree anthony Posts 338 Joined on 08-18-2014 Post #: 15 Post ID: 27144 Reply to: 27143 Midbass amp Romy, are you presently running a single or dual Vitavox 15" per side?  I assume this is.run from a DSET channel?  My room has a huge cancellation 60hz-100hz, broad and deep, and when I tried the Vitavox 15" drivers I could get two-fifths of stuff all volume from them...all room related it seems. Have since put a lot of bass treatment into the room but not remeasured so hopefully that broad cancellation is less broad now and less deep too.  Once under control I'll revisit the.midbass channel

06-25-2023 Post does not mapped to Knowledge Tree Bill Kensington, NH Posts 117 Joined on 03-15-2010 Post #: 16 Post ID: 27145 Reply to: 27143 Latest YouTube. In his latest YouTube,Romy mentioned using my prepro to time align my drivers. I use the Trinnov Altitude 16 prepro which has a total of 20 channels. 16 of the channels have balanced analog outputs and the othe four Channels use the rca and optical spdif outputs. Eight of the channels are used as active crossovers to my main horns and the rest for the surround speakers and subwoofers. The unit acts as active crossover, driver frequency correction, phase inversion, time alignment of all drivers and speakers to less than 1/10th of a millisecond, adjustment of frequency curves, speaker distance, volume correction and room correction, plus multiple other corrections. It can store up to 29 different setups. It can then be run as a stereo unit or use Dolby, dts or auro3d processing for surround. The unit then does up to 24/96 adc or dac conversion for analog output. As far as spatial alignment of the drivers, for approximate driver distances I use a laser distance unit, then the trinnov for accurate distance.I use a flashlight from my listening position to point at each horn's  driver to align it perfectly straight to the listener's ear position. In addition, for the horn tweeters, by doing multiple tests with the trinnov, I get the flattest frequency response curve up to 20khz.The altitude has the ability to do room correction from several locations but doing this decreases the accuracy of a single listening position response. I have primary response curves for the four driver stereo horns, plus 7.5.2 curves for video and 6.5.2 for surround audio.

06-25-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 17 Post ID: 27146 Reply to: 27144 Do not fight your room, embrace it. Anthony  As you can see in the picture it is one Vitavox 15" per side and the box is about 2 feet deep, so it good volume. I drive it from low frequency Milq channel that has a line-level 63 Hertz filter. Subjectively I feel that I would like to roll off the Vitavox driver slightly faster. I do not want to open the amplifiers and change filter as it is has all complexity, as a filter is integrated with the driver stage bias. I will probably put another first level filter at speaker level, at least initially. The key is, in my view, to find a sweet spot where tonally and dynamically upper knee off Vitavox 15" compete with lower knee of upper base horn, and to find which channel performs best in the octave between 70 and 140 cycles. I do not know the answer yet, I knew it before but then Vitavox in much smaller box, so I need to do all those experiments all over again. Ideally, when I find the answer, I would change it in the driver stage tube of Melquiades as in my view nothing could be better then to do it line level. I do not know your room, but I do not believe in acoustic treatment for low frequency, unless you do monumental architectural changes in your room.  The existing acoustic treatments do very unproportional treatment as very effective and a higher frequency. So, when you use them to treat your 100 Hertz they make reverberation time at 1000 cycles much shorter than you would like it to be as they're much more effective at higher frequencies. So, for 10% of correction 100 Hertz you create 300% damage at 1kHz. To treat some corners, VERY moderately it still might be OK but it is about it. My approach to dealing with the problem like this is very different and I I have written a lot about it. If you have a huge cancellation at 60hz-100hz, then introduce a dedicated mid bus channel where you will be able to play with crossovers, slope and phase your we'll be able to fix this room problem. If you read my Macondo’s axioms then you will see that I always advocate tonight fight acoustic problems in the room by use them. Find out the way to use your cancellation at 60hz-100hz for your advantage. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

06-25-2023 Post does not mapped to Knowledge Tree anthony Posts 338 Joined on 08-18-2014 Post #: 18 Post ID: 27147 Reply to: 27146 Bass treatment I've managed to make my own room treatments thus far,  all bass oriented and although some broadband absorption has been used the bulk is effective 30hz - 500hz.  It is an architectural type of solution where I have a covered the front and side walls and massively altered low end reverberation time without much changing midrange and top end times nearly as drastically... they are very even now from 40hz -20khz.   The major hurdle I have that most will not is that mine is a soundproof room.  I can close a door and the rest of the house has no clue if I have music playing loud... although the closed door is a give away!  That sealed room is super bad for room modes as little energy leaks through the walls and it all comes back as cancellations and reinforcements.   At the sidewalls , where the TT sits,  the 30Hz mode used to be 18db to 21db louder than what came from the bass cannons... since room bass treatment that is now 6db lower than that issued from the speakers...24dB to 27dB attenuation! As a result,  the quality of the bass is superb,  almost unbelievably good,  but it is also now quieter than it once was as much of what I used to hear was "old news" issued half a second or more ago, so I expect to rebalance the system shortly.  This is a long way of saying that I have already bass treated the room as it was the only conceivable way for me to even out the room frequency response without putting literally 1kW of amplifier power into a pair of Vitavox 15" per side, at 75Hz, which of course will not work. A little bit of bass treatment remains to be completed, on the ceiling this time,  and then room tuning with diffusion and perhaps some midrange absorption,  depending on how things sound.

06-25-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 19 Post ID: 27148 Reply to: 27147 Think about it as active room treatment Wow, where did you see a 1kW amplifier that is able to produce bass that does not make you vomit? Also, why would you need power like this. If you go with 15” high sensitivity driver, then you would need 20-30W max. Do not forget that your objective would be not override the 18db cancellation but very surgically to complement the room in one of other direction. The key would be not the excursion of your driver but the crossover pot in right location that will be by own face rotation will get rid of the room mode. Again, do not fight with the room, use what it has. Also, why it should be an expensive Vitavox driver? If you detect that the driver should out a lot of sound then you might go for Vitavox or good vintage Altec, or good vintage JBL. If you however detect that you need the drive not to “sound” but to do “phase injection” then you can go with anything smaller and let exotic. Think about your anti-cancellation chennal as an active room treatment.  The sound of the driver is OK but the selection of proper volume and proper crossover is 75% of success. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

07-01-2023 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,159 Joined on 05-28-2004 Post #: 20 Post ID: 27153 Reply to: 27143 Romy's new listening room, hopefully the last one. tarted to mount the open baffle for ULF channels at my attic.  The system is fully operational, not time aligned yet to the degree that I would like it to be but I'm going to tell you: that Tannoy Red 10 is something that makes everything so sweet and lovely that I have very hi expectations to the result. I use default twitter crossover; the low frequency cone is not even connected. I have long way to go to make this Twitter sound right. At this point I use just default crossover end run weather 6Bb down to Vitavox S2 driver. I am very sure that the final configuration will be different, but I will go for this after time alignment. I understand and change crossover point on Red driver will change my time alignment, so it will leave a lot of room for experiments, mistakes and findings. "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche