11-01-2021 Post does not mapped to Knowledge Tree Romy the Cat Boston, MA Posts 10,173 Joined on 05-28-2004 Post #: 1 Post ID: 26472 Reply to: 26472 100V vs 120V I know there are some folks here from Australia and Asia and I wonder if it is a subject known to them. I am lately Experimenting with some electronics made for internal Japanese market and naturally it is 100 volts. Some of the electronics which runs 100 words is a ok to work within USA voltage of 120 Volts And some not. Typically, we use converter transformers volts and I wonder if the people who involved in this detected any issues.  I have two converter Transformers and they sound different, and the electronic run through those Transformers sound different between 100 and 120 volts.  So, what is the best approach. Should I change a primary transformer for my electronic components in order not to have a proxy transformer? should I burn 20V by some means? There are many other options. so, who have experimented with this? "I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche

11-01-2021 Post does not mapped to Knowledge Tree anthony Posts 338 Joined on 08-18-2014 Post #: 2 Post ID: 26473 Reply to: 26472 A little I've played with this a little.  We are 230V in Australia but many years ago the standard was 240V and the power coming into our house is still a nominal 240V.  I remember playing with the Placette with a step down transformer and was not getting good results.  In the end I opened up the box and rewired the existing transformers so that the dual primaries are in series and thus suitable for 230V mains...and it sounded better.