| Search | Login/Register
   Home » Analog Playback» Universal VTA adjustment. (3 posts, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (3 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Don’t "use" VTA..  Don’t "use" VTA...  Audio For Dummies ™  Forum     0  26642  06-07-2004
  »  New  Vinyl Ceremonies: Repeatable VTA..  If Anyone Still Cares...  Analog Playback Forum     18  137052  05-10-2008
10-05-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,111
Joined on 05-28-2004

Post #: 1
Post ID: 8455
Reply to: 8455
Universal VTA adjustment.

People who read me site know that I am a big admirer of older SME arms 3012/3009. Everything is great on them except they have no objective VTA scale. The new SME arm: M2-12/9 has a fixing bolt that allows dial-in and to maintaining VTA very accurately. The old, sonically more advanced 3012/3009 do not have …BUT there is way the overcome it. I use this method for year and never experienced any problem with VTA.

Buy a deck of plastic-made playing cards and stick in the SME gap between the base and the movable SME part. You will have VERY objective and very accurate tool to measure VTA. For instance the Shelter 901 needed 18 cards, the new Jubilee (non-broken-in) needs 20 cards. A half-card is very simple to do by putting a tape above one “Joker Card” and always count it as 1.5 card.

This methods might be used with any arms and in my view it is way more convenient then any tools with horizontal markers. BTW, do not be deceived with my use of 0.5 card. If you buy thin cards then it is not necessary as one card in or out does produce good-enough result. If you cartridge is so super VTA-sensitive that it overly dramatically changes sound with one card then look for another cartridge as your ZYX is too freakish…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-06-2008 Post does not mapped to Knowledge Tree
Antonio J.
Madrid, Spain
Posts 272
Joined on 08-16-2004

Post #: 2
Post ID: 8459
Reply to: 8455
This sound familiar to me ;-)
Hehehe I think that was our first interchange at AA. I used that system on my former TT a Project whose arm doesn't have a calibrated scale for VTA adjustment. It's very practical indeed.
11-14-2009 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,111
Joined on 05-28-2004

Post #: 3
Post ID: 12268
Reply to: 8455
The ONLY properly implemented VTA adjustment.
fiogf49gjkf0d
Among all tonearms I have seen there was no one who did the VTA adjustment as intelligent as Advanced Analog Audio Lab’s MG-1 tonearm.

http://adanalog.com

In their air bearing linear tracking tonearm MG-1 they put a off the shelf digital micrometer into the use. The entire solution might cost $10 but has a stunning effect in convenience. The pictures are courtesy to Advanced Analog Audio Lab.

VTA_adjustment_1.jpg

VTA_adjustment_3.jpg

VTA_adjustment_2.jpg




"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 1 of 1 (3 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Don’t "use" VTA..  Don’t "use" VTA...  Audio For Dummies ™  Forum     0  26642  06-07-2004
  »  New  Vinyl Ceremonies: Repeatable VTA..  If Anyone Still Cares...  Analog Playback Forum     18  137052  05-10-2008
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts