| Search | Login/Register
   Home » Analog Playback» Silicone gel damping? (5 posts, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (5 items) Select Pages: 
08-31-2011 Post does not mapped to Knowledge Tree
N-set
Gdansk, Poland
Posts 616
Joined on 01-07-2006

Post #: 1
Post ID: 16900
Reply to: 16900
Silicone gel damping?
fiogf49gjkf0d
Has anyone tried this stuff for various dampings of the TT?
It's pricey but they promise miracles:

http://www.gelmec.co.uk/GelmecSoftSiliconeGelTape&Chips.html

Thanks!




Cheers,
Jarek
STACORE
08-31-2011 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,636
Joined on 10-12-2006

Post #: 2
Post ID: 16904
Reply to: 16900
Viscosity vs. Frequency vs. Amplitude
fiogf49gjkf0d
If you either target exactly the frequencies and amplitudes you're after, or you just happen to get lucky, the "right" silicone can be very effective.  My tonearm uses lots (not my design...), and I have used machinery that employed "dash-pots" and directly-applied silicone to very good effect.  However, I am talking about "liquid", not the "solid" stuff.  The silicone "glue" sticks stuff pretty well, and it is a good hi-temp insulator, but I don't use it for "damping".

Best regards,
Paul S
09-01-2011 Post does not mapped to Knowledge Tree
oxric
Posts 194
Joined on 02-12-2010

Post #: 3
Post ID: 16906
Reply to: 16900
My experience with Gelmec
fiogf49gjkf0d

N-Set,

When I looked very briefly into the subject, as I was looking for some damping material to use in my tube preamp/phonostage, I contacted Gelmec who were very helpful and professional as a company. They will send you a small selection of samples if you request it.

They have different formulations which will suit different applications and I am sure they have a product that might be quite useful in your application. For turntables, you could try the solution used by Romy (by coincidence I use the same principle but not the Vibraplane he uses) which is air suspension. It might be maintenance heavy, keeping the structure level, but nothing that is too difficult to achieve, even if you were to try to build the contraption yourself. I will send you some pictures of my air suspended platform if you like...

As for the liquid silicone damping Paul is talking about, as in Townshend's turntables, I think this is to use with tonearms. It is something I have been hoping to try someday...

Best regards
Rakesh

09-01-2011 Post does not mapped to Knowledge Tree
N-set
Gdansk, Poland
Posts 616
Joined on 01-07-2006

Post #: 4
Post ID: 16913
Reply to: 16906
Geltec
fiogf49gjkf0d
Thanks guys! rakesh, I haven't seen different compounds from Geltec, rather the same material
in different forms: bushings, chips, tape etc. I understand your point with the air suspension, but that's
not gonna happen now. There are shock absorbing frames for EMT's at fantastic 1500Eu price too...
I was rather looking for some damping I can apply localy at various places.
I'm curious how this geltec performs, compared to say sorbothane.

Yes, please send the pics!




Cheers,
Jarek
STACORE
09-01-2011 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,636
Joined on 10-12-2006

Post #: 5
Post ID: 16914
Reply to: 16913
Diode; "Heat"; What?
fiogf49gjkf0d
OK, how can this stuff be "universal"? If you de-couple something, then...  If you add [soft] mass, like model maker's clay, then...

Sorry to be so dim; I don't get it.  Why not just kill a chicken and drizzle the blood?

As for protecting TTs, a good wall-mount shelf can cut bleed-through quite a bit vs. a stand that sits on a "raised" floor.  As for tonearms, start with something strudy that features adjustable Si damping.  If adding mass to a headshell, consider a dab of model maker's clay.

Best regards,
Paul S
Page 1 of 1 (5 items) Select Pages: 
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts