| Search | Login/Register
   Home » Analog Playback» Micro Seiki SX 111FV Platter Removal (1 post, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (1 items) Select Pages: 
04-02-2016 Post does not mapped to Knowledge Tree
Posts 1
Joined on 04-02-2016

Post #: 1
Post ID: 22592
Reply to: 22592
Micro Seiki SX 111FV Platter Removal
Could someone help me get the platter off of this air bearing monster? It works well enough, but the brass is deeply tarnished from years of hand-assisted starts and stops. Can't effectively refinish it on the plinth. I assume that after unscrewing the top of the spindle, the platter should lift off the tapered main shaft. It's pretty snug, so I'm planning to use soft wooden wedges around the edge, and give the shaft a few sharp wacks with a plastic-faces hammer. Sound reasonable?
Thanks for any help, Cam
Page 1 of 1 (1 items) Select Pages: 
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts