| Search | Login/Register
   Home » Audio Discussions » It’s mad, mad, mad... electricity. (* posts, 25 pages)
  Print Thread | 1st Post |  
Page 34 of 96 (1,911 items) Select Pages:  « First ... « 32 33 34 35 36 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  What lives in Symmetric Sound?..  The beginning of our journey is ALWAYS symmetrical...  Audio Discussions  Forum     19  167191  05-28-2004
  »  New  Always check power-line polarity...  The Cost of Knowing...  Audio For Dummies ™  Forum     11  105737  07-10-2005
  »  New  RAAL “Water Drop” tweeter for Macondo...  Your comment takes me by surprise...  Horn-Loaded Speakers Forum     77  893669  02-16-2007
  »  New  My feelings about new exciting audio products..  Vacuumstate...  Audio Discussions  Forum     25  255160  04-30-2007
  »  New  Musique Concrete horns..  These are now sold as Kornhent products...  Horn-Loaded Speakers Forum     6  104377  06-12-2007
  »  New  Compression drivers and the “clean signal”...  The NEW “Compression drivers and the clean signal”....  Horn-Loaded Speakers Forum     14  157021  07-12-2007
  »  New  Digi Redux; Drive 1 transport and iDAT-44+ DAC..  Confirmation and Relief...  Didital Things  Forum     26  217859  09-28-2007
  »  New  Metal domes..  Try the one Lansche is using...  Audio Discussions  Forum     6  75775  11-08-2007
  »  New  The power AC Outlets?..  Where to Pick Up the Gong?...  Audio Discussions  Forum     2  41581  10-31-2008
  »  New  The Avicenna's failure is the great Avicenna success!..  New life for Avicenna...  Audio Discussions  Forum     8  80545  02-03-2009
  »  New  Internet and electricity..  Suboptimal. . ....  Didital Things  Forum     1  27982  01-07-2010
  »  New  Electricity... power strips and ac improvements..  Electricity... power strips and ac improvements...  Audio Discussions  Forum     0  16004  03-30-2010
  »  New  Another example of energy..  System Warm up...  Audio Discussions  Forum     1910  9407126  01-29-2011
  »  New  I good spot-light for a turntable?..  Reply...  Analog Playback Forum     15  148642  10-24-2010
12-13-2010 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 661
Post ID: 15184
Reply to: 15168
We need some time....
fiogf49gjkf0d
I got a contact from PurePower this morning and they requested some times to look into what is going on. It was not exactly pleasant that they took my behavior as my personal attack against them – it was absolutely not my intention and I have no personal animosity of any kind toward to PurePower. I might hate their marketing guy but this is my good a healthy hate of any marketing cockroaches

Anyway, from the conversation I have it was explainable why I felt abandoned with my little “fictional” problem.  PurePower needs some time to come back on-online.  Lets hope that they/we will be able to find what is the problem and return the PP2000 to where it shell be. I will retune to this subject next week

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-13-2010 Post does not mapped to Knowledge Tree
TonyB
Toronto
Posts 22
Joined on 04-14-2005

Post #: 662
Post ID: 15185
Reply to: 15180
Large Filter Cap
fiogf49gjkf0d
 Romy the Cat wrote:

  The first part of the image the PP2000 runs unit from itself and the second one is what AC is coming in. We see that some AC noise is coming on the negative side what the charger activated. You can get the frequency of the noise – it is 20uSec per square. Also the amplitude of the noise is very low – it is 0.02V per square, so in my mind the charger might works fine. I do not think that exist any higher frequency noise (I use slow 100MHz scope) as this all switching devised that works at 20-30kHz and would be not transparent for any noise over 10-15kHz. So, the interference between AC and DC operation is very low, not to mention that after first DC to DC up-converter it most likely shunted with a large cap that would ground all noise and interference.

The Cat



Wrong. The large cap will have large inductance and certainly it will NOT shunt
high frequency noise and interferrence.

TonyB

12-14-2010 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 663
Post ID: 15189
Reply to: 2931
Pulse Power Supply for amplifiers?
fiogf49gjkf0d

I usually do not cruse across DIY forums unless someone folks about me. Here it was - at some Russian DIY site they translated my article “6C33C survival guide” that made me to see what they have in there. One article from their site attracted my attention. It was from spring of 2010 by somebody called AlexD. He described how he built his 3-stages PP amps with 2N23P-6E6P-6С41С. I do not know if I like this amp but what this amp has interesting was the power supply – he use pulse power supply from computers but hand rebuilt. The article in Russian and to see the articles you need to be registered (stupid thing to do in my view) but the images are clickable and can get bigger even for guests.

http://datagor.ru/amplifiers/tubes/1209-moshhnyjj-rr-na-6s41s-s-pitaniem-ot-impulsnogo-bp..html

I do not know if I am a fan of Pulse Power Supply but in context of what I am going now with PurePower it made me to think. I do not know why a properly working PP2000 produces such a positive sonic effect comparing to the linear regenerators that out much less distortions and noise.  So, frankly I would not mind to hear an amp with Pulse Power Supply built explicitly for a given amp. It might be interesting.

You see. We use a regenerators like PP2000 or PS Audio’s Power Plant to reshape the sinewave and we are under presumption that crooked wave is not good. Then we give to amp a perfect wave and it is still not good sounding – think about Avicenna or Power Plant regenerators. In contrary the older version of PP2000 did sound very well despite that it had much higher distortions of sinewave. So, let assume just for mental exercises that the quality of sound is absolutely independent from the sinewave deformation. Let also assume that not the fact of deformation but the outcomes of deformation affect sound. For instance if sinewave is clipped – a common problem with AC lines then the act of clipping itself injects a huge amount of HF noise into the line. The noise is very higher harmonics of unclipped signal, so we have 4th, 11th, 23th, 34th harmonics, they are way attenuated but they are there and they are in ULF…. Then we have Pulse Power Supply…

According to the Nyquist–Shannon-Kotelnikov sampling law:

http://en.wikipedia.org/wiki/Nyquist%E2%80%93Shannon_sampling_theorem

any switching devise is able to reproduce no higher frequency then a half of sampling rate. It means that the device like PurePower PP2000 that runs let sat at 20kHz of sampling rate is absolutely immune to any line noise that is higher than 10KHz. Any higher frequency noise just falls between the pulses of the switching device. So, purely hypothetically: if the quietly of sound from a properly operating PP2000 derives from the fact that it is pulse but not from the reshape sinusoid then why a Pulse Power Supply on SET amp with no regeneration would not do the same trick?

What I would like to see is somebody makes a SET amp with linear PS and then substitutes it with Pulse PS. Of cause it might be zillion reasons why ether linear PS or Pulse PS would not sound good but I would like to hear not the absolute performance but to hear if the change in sound would be in the SAME strategic direction as the properly operating PP2000 takes sound to. At this point I truly know what to look for in sound and how identify the PP2000-like contribution to sound. So, if someone in New England would accommodate Pulse Power Supply for your SET then let me know and I would like to hear it “before” and “after”.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-14-2010 Post does not mapped to Knowledge Tree
clarkjohnsen
Boston, MA, US
Posts 298
Joined on 06-02-2004

Post #: 664
Post ID: 15190
Reply to: 15189
My 2 cents
fiogf49gjkf0d
I've been following this sometimes acrimonious controversy from afar -- Florida, in fact. But I've not read everything. Now I have a suggestion re: solar. I have an ad for discount solar panels from http://www.harborfreight.com/ where they offer a 45-watt set for $150. That could run a preamp at least. For that low buy-in someone could get a set and experiment. It would be a start!

clark
12-17-2010 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 665
Post ID: 15225
Reply to: 15184
Great news and great update.
fiogf49gjkf0d
 Romy the Cat wrote:
I got a contact from PurePower this morning and they requested some times to look into what is going on. It was not exactly pleasant that they took my behavior as my personal attack against them – it was absolutely not my intention and I have no personal animosity of any kind toward to PurePower. I might hate their marketing guy but this is my good a healthy hate of any marketing cockroaches

Anyway, from the conversation I have it was explainable why I felt abandoned with my little “fictional” problem.  PurePower needs some time to come back on-online.  Lets hope that they/we will be able to find what is the problem and return the PP2000 to where it shell be. I will retune to this subject next week
It looks like PurePower did find something in my regenerator and they are very confident that they will fix it.  Sure, I would like it never happen with my units but it is what it is. The PurePower is so confident the they know what the problem is that give me 110% that whatever they will fix will bring sound back what it used to be with my old unit. This opportunity made me literary horny as after a year (actually 2 years, from December of 2008) of absolutely discarding electricity problems and laughing on the people who do not use PP2000 I felt absolutely fucked by losing my regenerators.

They promise that I get my first unit back before the end of the year – I will handcraft myself to the mail box. If the new regenerators will sound good then the only thing that would make me absolutely happy would be if PurePower send me that cut off ears of their stupid sales pimp - Bob Rappaport. I will dry them out, put in me herbarium and then will use them as my next Halloween costume – I will be dressed as a Deaf Idiot.

Rgs, Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-18-2010 Post does not mapped to Knowledge Tree
Young Skywalker
Posts 1
Joined on 07-02-2006

Post #: 666
Post ID: 15228
Reply to: 15225
Light at the end of the PurePower tunnel?
fiogf49gjkf0d
 Romy the Cat wrote:
 Romy the Cat wrote:
I got a contact from PurePower this morning and they requested some times to look into what is going on. It was not exactly pleasant that they took my behavior as my personal attack against them – it was absolutely not my intention and I have no personal animosity of any kind toward to PurePower. I might hate their marketing guy but this is my good a healthy hate of any marketing cockroaches

Anyway, from the conversation I have it was explainable why I felt abandoned with my little “fictional” problem.  PurePower needs some time to come back on-online.  Lets hope that they/we will be able to find what is the problem and return the PP2000 to where it shell be. I will retune to this subject next week
It looks like PurePower did find something in my regenerator and they are very confident that they will fix it.  Sure, I would like it never happen with my units but it is what it is. The PurePower is so confident the they know what the problem is that give me 110% that whatever they will fix will bring sound back what it used to be with my old unit. This opportunity made me literary horny as after a year (actually 2 years, from December of 2008) of absolutely discarding electricity problems and laughing on the people who do not use PP2000 I felt absolutely fucked by losing my regenerators.

They promise that I get my first unit back before the end of the year – I will handcraft myself to the mail box. If the new regenerators will sound good then the only thing that would make me absolutely happy would be if PurePower send me that cut off ears of their stupid sales pimp - Bob Rappaport. I will dry them out, put in me herbarium and then will use them as my next Halloween costume – I will be dressed as a Deaf Idiot.

Rgs, Romy the Cat

I have been intently following this thread for many years and this recent update is very encouraging. I hope that the Pure Power people can deliver on their promise and that the sonic outcome meets with your objectives. Please do share the root of the problem along with the solution so that other recent Pure Power users might benefit from your harrowing experience.
Regards,YS
12-18-2010 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 667
Post ID: 15232
Reply to: 15228
No philosophers' stone of electricity?
fiogf49gjkf0d

 Young Skywalker wrote:

I have been intently following this thread for many years and this recent update is very encouraging. I hope that the Pure Power people can deliver on their promise and that the sonic outcome meets with your objectives. Please do share the root of the problem along with the solution so that other recent Pure Power users might benefit from your harrowing experience.
Regards,YS

Skywalker,

I am afraid that that I am not a spoke person for the company and the root of the problem along with the solutions for others is not something that I am willing to discuss. I have no idea what problem other might have and if they have any. My statue of a “public figure” has some self-imposed restrictions. I do not practice a consumer advocacy or investigative journalism in audio. The “truth” in audio interests me as long as it affects myself – I very much individualist or probably more accurately to say audio egocentric egotist. My PP2000 stopped working and it spelt disaster in my little made-up world as I have spent so much time and efforts until I found the PurePower device. My fear was very genuine as I thought I need to find another solution and it was not in my plans. I even made a call to people I know asking to build my own regenerator, identical to PP2000.

I do not know what went wrong with my 3 PP2000. The PurePower technical folks did give me a reason but frankly I do not particularly believe into those reasons and in all explanations they gave me, also do not forget that PurePower tell me only what they want to tell me. But what would I do care – tha they are confident that they know the reasons and if they assure me that the unit will be the “magic box again” - what else do I need to care? Theoretically the things happens, I just wish they did not BS me for 2 weeks insisting that the wrong sound from PP2000 was the result of my hallucinations or was course my sophomoric use of the unit. Still, they did find the problem and the feel very comfortably that it will be addressed. I think the fixed unit will be coming after Xmas, I think at this point I am obligated to report the result. I assure you that the report will be absolutely objective.

In this whole story there is a sad part. The new PP2000 did sound bad despite of fine measurement of the wave. If I get the fixed PP2000 and if it sounds fine then most likely it will be producing the same wave. So, the sound quality does not derive from the distortion of the fundamental but from something else. I afraid that the analyse, experimentation and looking deeper into this “something else” is even more important than to get the PP2000 fixed. I would LOVE to learns about that “something else” and I would like to see if that “something else algorithm” might be applied to not-regenerated AC and to a bad wave.  My presumption that it might happen that in order to have good Sound the regeneration is not necessary at all. I was trying to arouse the PurePower people to this thinking but I did not feel that they are interested to look into this deeper, I am not sure they understand the whole idea.

Anyhow, as the PP2000 will be fixed I do not have any itch to look into the problem myself and to search for that “something else” or for the philosophers' stone of electricity. I will not know the truth why those things work but do you want to be right or to be happy? I am kind of getting old to be right nowadays I just look forward to be a “user” and to be happy. Hey, I did all that a sane person shall do, I even got 3 of PP2000 in to assure that they will be available for me in future if US decare war to Canada and will ban all Canadian goods…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-19-2010 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 668
Post ID: 15239
Reply to: 2931
The new PS Audio Power Plants P5 and P10
fiogf49gjkf0d

Got today a December 2010 PS Audio Newsletter with an announcement from Paul McGowan:

“…So, in January 2011, we will release one of our secret projects that have been in the works for two years now, the PerfectWave P5 and P10 Power Plants.  Not necessarily a replacement for the venerable PPP, but two new additions to an already powerful (pun intended) AC power line.

Both the P5 and the P10 are completely redesigned from the ground up to be the best and most reliable performers we have ever built.  There’s a whole host of features and functions you’ve been asking for, all bundled up into these great designs.  Certainly a major upgrade step from the PPP, so if you’re looking to kick your system up a notch or two, this is the ticket.  A P5 or P10, compared to any other power conditioner in the world, just stomps them.

 Because this is just a sneak peek at these new products, we’re not releasing any more information than what we are presenting here to our Newsletter readers.  The full story in January.

The P5, which is the smaller of the two, is housed in a gorgeous matching PerfectWave chassis and is capable of a continuous 1000 watts of power, with peaks up to 1200 watts.  It has 4 isolated and switched zones and one of the zones is specially designed and optimized for high power applications like big power amplifiers.

Inside the P5 we have twice the number of capacitors for greater energy storage, ten times lower output impedance through a four-fold increase in output devices (compared to the PPP).  Better dynamics, blacker blacks, and extended voltage range are all waiting for new P5 owners.

From the front panel, there’s an amazing new touch screen controller for both models.

 With the touch screen you can now fine tune your unit’s output voltage, switch individual zones on and off with a touch of your finger, measure the wattage being delivered and used, the THD and voltage in and out.  But here’s a real kicker: we added an oscilloscope to the touch screen!  Now, for the first time, you can actually see the incoming and outgoing waveforms on your line.  So, not only can you measure the distortion on the line, you can see it.

And because the new PerfectWave Power Plants reduce distortion over 10 times, we will show you the residual or the difference between what’s coming in and what’s going out.  I can’t wait for you to see this in action.  It’s freaking awesome.  Wait till you see what the difference between incoming and outgoing power looks like on a scope.  It’s downright frightening - and keep in mind, no power conditioner can fix any of these problems.  Only a Power Plant can.

But wait, we haven’t yet written about the P10. Housed in a beautifully stretched PerfectWave chassis (same footprint, just taller) which is, incidentally, the same chassis as we’ll put our new power amplifier in - the P10 is a real gem to behold.  Massive heat sinks along the sides cool without fans and this beast weighs in at more than 65 pounds.  Truly a force to be reckoned with.

Performance wise, it’s a stunning achievement.  1200 continuous watts of pure sine wave power and 1500 peak watts handle just about anything you can throw at this AC regenerator.  It features 5 zones, two of which are optimized for high current applications, each switchable from the front panel touch screen which has all the cool features I just mentioned above.

Inside , we have twice the magnetics, twice the capacitive energy storage, four times the output devices of the Premier and this baby just rocks.

Both the 5 and 10 have what we like to refer to as extended voltage range as well.  This feature solves one of the problems we’ve had with the Premiers: over voltage in some areas.  Sure, the PPP can protect your equipment, but in some cases, the PPP itself could fail or have worse performance when too large a voltage swing happened.

Now, with the 5 and 10, we can get crazy voltages without any penalties.  For example, in places like Australia where the nominal voltage is 240 volts, we see swings up to 280!  The PPP could not handle such a big swing, but the new PerfectWave Premiers can, no sweat.

 Lastly, there are a number of cool internet based features that give the new Power Plants green features as well as monitoring from a web page.  Both the P5 and P10 connect to our Globalnet servers and allow you to access them over the internet.  Just go to your unit’s web page, schedule the PerfectWave Power Plant to turn equipment (or even itself) on or off according to any schedule you want and everything is handled.

This new addition to the Power Plant line is very exciting and the culmination of two years of engineering.  Both models will go on sale next month, January 2011.  For those of you wishing to step up to a PerfectWave Premier, we will have an aggressive trade up program available worldwide to assist you in this.

Get excited.  It’s worth it.

Pricing is different depending on the voltage because of the different magnetics required.  Suggested retail for the P5 is $2999 for 100 to 120 volt units and $3,499 for 230 volt units.  The P10 is $4499 for 100 to 120 volt units and $4999 for 230 volt devices.

We’ll announce the official worldwide trade up program in the January Newsletter.”

Well, it is hard predict what it will be. From what Paul describes it look like it will be the same old PP but with new bells and whistles. The interns ass is not particularly bad, it is nice to tonal to own network and turn the amps on to make sure the they are warmed 30-40 minutes before you airbed. Sure it will have a remote control and remote controlled bypass switch. It looks like the topology is the same - class A/B amp. That is good that PS Audio stuck within it. We need a diversity of approaches. Paul said that his new regenerators are “completely redesigned from the ground up”, well why not to gullible and to believe. I do not see why the new Power Plants shell sound better then old one as PS Audio never acknowledge any sound problem with old Power Plants but let to have open mind about it. I still have one PS Audio Power Plants and I might trade it up of the new Power Plants sound acceptable.

If somebody near Boston get the new Power Plants then bring them in for an evening and we see how the new generation of Power Plants do against my (hopefully fixed) Purepower PP2000

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-19-2010 Post does not mapped to Knowledge Tree
Meiko41
Posts 9
Joined on 07-17-2009

Post #: 669
Post ID: 15240
Reply to: 15239
Issues with the Power Plants ?
fiogf49gjkf0d
Dear Romy,

You said that PS Audio never acknowledged any sound problem with old PP. Did you ever identify something "technically wrong" in the sinewave that a PPP outputs that peoples from PS could work on ?
May be I miss your report on that point but the only comment I can remember is that although the signal is very good (at least much better than a Purepower), it does not sound as you would like it to be.

Regards
 

12-19-2010 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 670
Post ID: 15242
Reply to: 15240
Something about “something”.
fiogf49gjkf0d

 Meiko41 wrote:
Dear Romy,
You said that PS Audio never acknowledged any sound problem with old PP. Did you ever identify something "technically wrong" in the sinewave that a PPP outputs that peoples from PS could work on ?
May be I miss your report on that point but the only comment I can remember is that although the signal is very good (at least much better than a Purepower), it does not sound as you would like it to be.

Oh no, absolutely not. There was absolutely nothing "technically wrong" with the sinewave that a PS Audio Power Plant outputted. In fact the sine wave was exemplary, regardless the load I tried. The problem was with sound, with the fact that the Power Plant did not sound as good as “good sounding” generator shall sound.  You see, we are under impressions that bad sound come ONLY from the distortion of sinewave but it is not truly the case. BTW, I did encouraged Paul McGowan 4 years back when I first heard the PurePower to go class D but he refused as he felt (I think ) that this niche market was already taken. I was trying to convince him at that time that his Power Plants sonically way more inferior to PurePower PP1050 but he decided to be where he would like to be. Well, he has his full rights to do whatever makes him happy.

I think he was fool then and his is fooling himself now.  In a way it is good and bad thing that PS Audio did not move toward to class D generators years back. Good is in the fact that somebody keep putrefying the class A/B regenerators, who knows might be they come up with something good eventually. Bad is in the fact that PurePower has no competition neither in design, nor in Sound. To the best of my knowledge PurePower s the only company the offer class D audio regenerators. If we had 5 companies like PurePower competing for the same very small market then we would have much more exiting products with very rapid development-to-shelf cycle.

I think it is about money. PurePower is a small company that most likely adopted an existing UPS devise and tweaked it up to the point to make it suitable for audio needs. It is not designed from ground up for audio needs in my view and in view of some people with whom I consulted. Those UPS devised are design for cheap assembly and extremely confusing layout where all elements of the circuit sit atop of each other. When showed the PurePower layout to my engineers who deal with switching devises then they informed me that PurePower shall be 4 times smaller, must be completely differently arranged internally and shall out as stable sinewave as PPP goes. 

I very much not criticizing PurePower I just say that with absence of competition they can do whatever they want. If tomorrow APC , HP, Fluke or Tektronix with their billions dollars revenue and thousands good engineers on payroll who trains to deal with mission-critical systems would heir new CO who happen to be audio guy then those companies would come up with instrumental regenerator against which Paul McGowan would calibrate his distortion analyzer.

Again, we still do not know if we need all of it as we do not know who one power devise sound good and why another sound bad. We do know why in some cased the electricity is very bad for audio. We can predict what it will be bad. The problem that I am not sure that we can predict what electricity will be good for Sound. Something that PurePower does make it good. As I told before – I do not think that PurePower people know what it is…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
12-20-2010 Post does not mapped to Knowledge Tree
AOK_Farmer


Marlboro NY USA
Posts 64
Joined on 07-08-2004

Post #: 671
Post ID: 15247
Reply to: 15242
Perhaps a tungsten flywheel?
fiogf49gjkf0d
If in the basement next to the failed Chevy Volt battery experiment and my fresh grave you had a massive flywheel spinning at a constant velocity powered by a motor attached to the grid and then used magnets embedded in the flywheel to regenerate the fresh AC perhaps this would give us the audio grade ac?

Like this:   http://home.earthlink.net/~fradella/homepage.htm




Steve
12-20-2010 Post does not mapped to Knowledge Tree
scooter
Posts 161
Joined on 07-17-2008

Post #: 672
Post ID: 15248
Reply to: 15247
Flying flywheels
fiogf49gjkf0d
Over the past decades several serious people/firms have looked into using flywheels to store energy but that didn't really get too far. If I recall correctly, key challenges included forming round bearings in earth's gravity/wear on the bearings (significantly slowed down wheel, reducing potential). Also the amount of energy stored in a heavy, rapidly spinning flywheel is a (huge) safety issue if/when the flywheel gets dislodged. However an interesting idea as an intermediate isolation step from line AC if given the room, funds and time. . .
12-20-2010 Post does not mapped to Knowledge Tree
AOK_Farmer


Marlboro NY USA
Posts 64
Joined on 07-08-2004

Post #: 673
Post ID: 15249
Reply to: 15248
Chemical Noise
fiogf49gjkf0d
I think that it would be informative and interesting to amplify and record the chemical noise of different types of batteries and then place this recorded noise at say +20 dB to the noise floor on a music recording and see how advanced listeners react to it's presence. 

Of course this assumes that the noise of batteries is a fair bit above the noise floor of the recording chain so that the recording and amplification of the chemical noise is even possible. Perhaps better to just run a recording device on the particular batteries whose noise it is you are trying to record, record nothing and simply amplify the noise floor of the recording which I imagine is primarily the battery noise.

If this did prove interesting then an idea would be to separate the wall AC from the equipment AC by a battery chemical cell rather than just regenerating the equipment AC with a Class D amplifier from the DC of the rectified wall AC  as the PurePower unit does when not in battery mode.

Of course if Romy et al find that the corrected PurePower unit works as well in non-battery operation as it does in battery operation then this is a far less compelling experiment but still I think interesting and not so expensive to undertake.


Steve
01-02-2011 Post does not mapped to Knowledge Tree
Lx_
France
Posts 33
Joined on 12-06-2009

Post #: 674
Post ID: 15351
Reply to: 15149
PP2000 with lifted ground
fiogf49gjkf0d
 Paul S wrote:
I suppose there are the usual strong strictures against it, but has anyone tried lifting the (3rd wire) ground only during wall-powered operation?  Best results, whatever that might mean, would require a "dedicated home run" for the neutral wire.

Actually I have reported problems with my unit operating better on the battery than when plugged on AC soon after receiving it in April 2009. Basically, I can hear the heaters getting on/off, the water heater and pretty much everything dirty on the AC line (switched PS and the likes!). One wonders whether the PP2000 even has any filtering capability... BTW my PP2000 is alone on a circuit from the breaker box, but that does not provide much isolation as noise clearly finds its way back from ground/neutral through that box.

Among the tests I did at the time, I tried lifting the ground at the PP input. This improves things a little, but it is not as good as running on battery. When I say "on battery" I mean completely unplugged. I did not test leaving the PP plugged in and playing with the "input breaker" switch on the back panel.

I even suggested then that there may be a problem with the isolation of the AC line/battery inside the PP2000. The French importer told me that APS had detected an issue on their european model. He ordered a newer unit where this had been fixed. Unfortunately the importer then simply vanished God knows where and I got stuck with my unit.

From what I read here I now doubt very much that those problems were at any time solved by APS (at least knowingly).
01-02-2011 Post does not mapped to Knowledge Tree
Lx_
France
Posts 33
Joined on 12-06-2009

Post #: 675
Post ID: 15352
Reply to: 15163
You have several of those, that makes up for some good experiments
fiogf49gjkf0d
 Romy the Cat wrote:

To my surprise, pleasure and horror they all turned out to be absolutely differently sounding.

PP2000 #1. This one that has been using all week - the updated my old PP2000 (new version of motherboard). This one the absolutely worst – large amount of unpleasant noise, hugely homogenized tone, no bass, no anything – just disaster. It runs fine on batteries with fine sound. This unit I did some very basic measurement and they were fine.

PP2000 #2. I do not get this unit. It does much less, practically no noise and no homogenization. It has some bass and in a way a clear bass. But something is very wrong in this sound, I can’t figure out what. It runs not identical but similar from buttery. I have no idea what is wrong with it, I did not measure it and I prefer do not use it.

PP2000 #3. This is a lucky bustard.  It has practically no noise, no homogenization and it highlights the tones almost as good as my old PP2000 did. It has that precision, discrimination and authority in tonal and dynamic accents for which I so love the PP2000. It has a bit too shallow very lower bass and a bit general brightness that I did not remember the old unit had. It is not a lot but it there. It runs from buttery a very slightly better – picking the lower bass in partially getting rid of the business at HF.  The way how this unit sound from butteries is how the properly functioning PP2000 shall sound.

The PP2000 #3 I think is useable, the first two units I am afraid not. I would like to have my old PP2000 back then I will have 2 find sounding PP2000 hopefully if PurePower will fix whatever is wrong with the new revision then I will get my third unit. Since the all so not even it is possible that the secret in some kind of calibration or adjustment that might be not done properly at PurePower. I did ask multiple times before they shipped them if the tested them and they told that they did. I did not measure my PP2000 #2 and PP2000 #3 but even my worst PP2000 (#1) measures fine. So, go figures that are responsible for sound in those units. If PurePower have more interest about subject of good sound and how to get it predictable then the situation might be a great opportunity to learn about it. Unfortunately it looks that PurePower more care about damage management. Boring and contra-productive.

The Cat

Romy, for me this is enough proof that there is indeed a problem with the PP2000, as it shows that there is variation in sound when only the PP changes. Or is it only the PP that changes? How confident are you that your dedicated lines are not dirty to varying levels? Have you tried cascading two PP2000? After all, if you tell APS that the PP2000 works better on battery than when plugged on AC coming from another PP2000, maybe they will listen (hope they do just that when testing).
01-02-2011 Post does not mapped to Knowledge Tree
clarkjohnsen
Boston, MA, US
Posts 298
Joined on 06-02-2004

Post #: 676
Post ID: 15354
Reply to: 15352
A possible explanation
fiogf49gjkf0d
Audio equipment can be enormously sensitive to AC polarity. I do not mean correct "hot" and "neutral" in the outlet, rather which way it enters your electronics. (I and others have tried for decades to alert the world.) Worst, there is no standard and gear is pretty much split. Likewise -- power scrubbers.

Correction could be as simple as switching hot and neutral (but not ground) at the input on any of these. Try it.

clark
01-02-2011 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-28-2004

Post #: 677
Post ID: 15356
Reply to: 15352
They are working on it
fiogf49gjkf0d

Lx, you do not need to convince me that PP2000 has problem or problems. Of cause it is way beyond the sophomoric solutions like lift the ground and AC polarity. No, I did not try the cascading PP2000, I did ask PurePower about it and they were now able to come up with a definitive answer if is it OK to do it. I eventually lost my interest to the cascading as I concluded that it is not due insulation but due to other problems.

My PP2000s did have a problem and I think they did found it, not all of the problems but they are working on it. They are cooperative and they are listening, coincidently when I discover the problem with my PP2000s sound the PurePower owner was at his sabbatical…

The truth is that properly operating PP2000 sounds perfectly fine from buttery or from AC - this is the whole concept. The problem is that I do not think that anybody, including the PurePower people, know why the PP2000 sounds so damn good when it is operating properly. So, I presume they are making some minor changes with the very best intentions and do not realize that they are tossing that proverbial baby while are distilling the water.

There is a joke that I told to PurePower people before the New Year. I love this joke and I always told it to my students. A space shuttle was sending out with join Russian-US mission. It has one Russian cosmonaut and an American monkey. When the shuttle hit the orbit everyone opened own flight plan envelops. The monkey’s envelop said: open solar panels, initiate navigation system, activate cooling system, transmit to Earth the launching data, etc, etc, etc… The cosmonaut’s envelop said: “feed the monkey and do not touch anything”.  It might be funny but in reality I would greatly appreciate if the PP2000 sound was “locked”. It is loose now and PurePower is trying to put it back to the cage. For now, I am without “Romy’s sound” for a while. I have audio friends from Europe who asked me to stop at my place on their way from CES for some listening sessions. This year I turned them down as without my old PP2000 my sound is very much not where it has to be. That is kind of suck and some of them have bought tickets with Boston fly switch….

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-02-2011 Post does not mapped to Knowledge Tree
PurePower
Ayr, ON
Posts 44
Joined on 05-26-2009

Post #: 678
Post ID: 15357
Reply to: 15352
French ground noise problems
fiogf49gjkf0d
LX_'s ground noise needs to be addressed - he should not have to put up with refrigerators and air conditioners interfering with his listening. However, it is important to understand that the solution to ground issues will have to be found in the house AC ground wiring, not in the PurePower 2000. The 2000 produces a completely new 230 volt AC sine wave that is absolutely isolated from the utility input power. No sag, surge, transient, distortion or noise present in the utility AC will appear in the PurePower output. But the safety ground is continuous from the house ground through the ground in every component, signal interconnect ground and grounded component case. Lifting the ground at the utility receptacle may clean up common mode noise, but the risk of electrocuting grandchildren is an unacceptable trade off.  We never, ever, support that solution even if it can be difficult to find the faulty wiring that is causing the ground noise to start with.

It is worth it to take the time and effort to ensure all ground circuits are properly bonded and correctly made., especially at the service entrance.  Sometimes it is relatively easy to resolve. Using a separate "isolated ground circuit" often is enough, but if the problem is severe, it won't be enough. Some European grounding systems are quite different than North American schemes, but we would be happy to offer some advice and support on that and any other PurePower issues, including dealer support. Just email me.

p.s. All of Romy's musings and tests on the relation between the electrical characteristics of PurePower units and his objective and subjective sonic impressions are not applicable to the PurePower 230 volt models. The difference in operating voltage makes a significant difference in electrical performance characteristics even though the technology is essentially identical. 

 

 
01-02-2011 Post does not mapped to Knowledge Tree
clarkjohnsen
Boston, MA, US
Posts 298
Joined on 06-02-2004

Post #: 679
Post ID: 15358
Reply to: 15356
???
fiogf49gjkf0d
 "It is way beyond the sophomoric solutions like... AC polarity."

From that remark one may deduce that the writer has already tried this solution and found it wanting, or has not tried it but dismisses it out of hand, or doesn't know what he's talking about. That's the trouble with disdainfulness: One never knows.

clark
01-03-2011 Post does not mapped to Knowledge Tree
manisandher
London
Posts 158
Joined on 09-05-2008

Post #: 680
Post ID: 15359
Reply to: 15357
230V model
fiogf49gjkf0d
 PurePower wrote:
All of Romy's musings and tests on the relation between the electrical characteristics of PurePower units and his objective and subjective sonic impressions are not applicable to the PurePower 230 volt models. The difference in operating voltage makes a significant difference in electrical performance characteristics even though the technology is essentially identical.
Well, I beg to differ.

There is a HUGE difference in SQ between AC and battery with my new 230V model. The AC is edgy and sharp (pretty much unlistenable) whilst the battery is smooth and harmonically rich.

I'm hoping to have my new dedicated mains installed in the next couple of weeks (weather permitting - the installer is not prepared to dig a 10-foot hole for the Chem Rod when the ground is frozen) and will see if this helps bring the AC performance in-line with that of the battery. Meanwhile, I continue to enjoy the PurePower through its battery... though I agree 100% with Romy that this should not be the final solution and certainly not what I paid for.

Mani.
Page 34 of 96 (1,911 items) Select Pages:  « First ... « 32 33 34 35 36 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  What lives in Symmetric Sound?..  The beginning of our journey is ALWAYS symmetrical...  Audio Discussions  Forum     19  167191  05-28-2004
  »  New  Always check power-line polarity...  The Cost of Knowing...  Audio For Dummies ™  Forum     11  105737  07-10-2005
  »  New  RAAL “Water Drop” tweeter for Macondo...  Your comment takes me by surprise...  Horn-Loaded Speakers Forum     77  893669  02-16-2007
  »  New  My feelings about new exciting audio products..  Vacuumstate...  Audio Discussions  Forum     25  255160  04-30-2007
  »  New  Musique Concrete horns..  These are now sold as Kornhent products...  Horn-Loaded Speakers Forum     6  104377  06-12-2007
  »  New  Compression drivers and the “clean signal”...  The NEW “Compression drivers and the clean signal”....  Horn-Loaded Speakers Forum     14  157021  07-12-2007
  »  New  Digi Redux; Drive 1 transport and iDAT-44+ DAC..  Confirmation and Relief...  Didital Things  Forum     26  217859  09-28-2007
  »  New  Metal domes..  Try the one Lansche is using...  Audio Discussions  Forum     6  75775  11-08-2007
  »  New  The power AC Outlets?..  Where to Pick Up the Gong?...  Audio Discussions  Forum     2  41581  10-31-2008
  »  New  The Avicenna's failure is the great Avicenna success!..  New life for Avicenna...  Audio Discussions  Forum     8  80545  02-03-2009
  »  New  Internet and electricity..  Suboptimal. . ....  Didital Things  Forum     1  27982  01-07-2010
  »  New  Electricity... power strips and ac improvements..  Electricity... power strips and ac improvements...  Audio Discussions  Forum     0  16004  03-30-2010
  »  New  Another example of energy..  System Warm up...  Audio Discussions  Forum     1910  9407126  01-29-2011
  »  New  I good spot-light for a turntable?..  Reply...  Analog Playback Forum     15  148642  10-24-2010
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts