Rerurn to Romy the Cat's Site


In the Forum: Horn-Loaded Speakers
In the Thread: Problems with horns: mid-range horns.
Post Subject: First or second order for 1" driver.Posted by tuga on: 1/8/2009
fiogf49gjkf0d
 Romy the Cat wrote:
I am not sure what you are asking. If you willing to get 400Hz horn into 1” tractrix then it might not be any controversy about the horn’s length, it is already given and the folks from lab.de will know it and will do the right length. If they have more than one length for the same mouth rate then those horns have ether different profile or they targeted against different throat diameter. There are no the other options in existence.


Hello Romy,

The Stereo-Lab horns have arrived and I have mounted them on temporary supports: on a first analysis clarity, imaging and tonal gradations have improved considerably; and, although I haven't made any measurements, I think that they have increase MF gain.
I have felt the need to move further away from the speakers but this could be due to the overly high position of the MF horn, something that I am planning to correct.
I am passing them at 1.000Hz and 12.500Hz.
Now the question is whether to go first on second order.

Best,
Tuga

Rerurn to Romy the Cat's Site