Rerurn to Romy the Cat's Site
In the Forum: Melquiades Amplifier
In the Thread: Bias help
Post Subject: PicsPosted by cb on: 10/25/2007
Hi Romy
Here are a couple of pictures below. The chassis is 18mm mdf and the copper plate is cut from 0.7mm roofing/cladding copper sheets. Nothing too heavy attached the on copper plates and it seems to be ok. No fan for cooling, so lots of holes cut in the mdf for ventilation, so far so good for heat dissipation.
"BTW, Milq topology allows to do some crazy thighs, for instance do not use positive bays… I will tell you later on about it if you have interest…."
It will be good to hear about the "crazy thighs" but no hurry, as I will play around with the amp as is first...
Best Regards,
Charles
Rerurn to Romy the Cat's Site