Rerurn to Romy the Cat's Site

BTW, Jessie,

I have another solution for you if you have some extra space and… distance….. It is what I will do after I became a boring US suburban habitant… (BTW, it is not my RTD invention (Real Time Decupling) that implied in the mid of the thread – that invention is still “deeply classified”… :-)

So, what you might try is to get 5kW AC generator. They are not really large; it will be approximately 20-30” long. You might see one on the picture:

http://www.northern-lights.com/PDFs/brochure_pdfs/M673LD2.pdf

The generator is the cylindrical object of the 1/3 size on the left (you do not need a motor). There is a large availability of all kind of AC generators, and they cost from a couple to a few hundreds dollars at many surpass stores.

Then direct couple the generator with any AC motor. Running the motor from your dirty AC power lines you will be spinning the generators and take from the generators absolutely physically decoupled electricity, free from any problems of the grid (noise, distorts and so on). You might very easily stabilize the rotations of the AC motor and by planning with the modes (load, rotation, stator magnetizing force, frequency and etc) of the generator you might tune a perfect sound for your given setup. The beauty of this solution that sine you found it one it will NEVER change as you are not at mercy to anything that happens in the power grid.

Be advised that the good contemporary generators and motors have near 95% efficiency and they are really quiet nowadays…. Still I would pit the thing somewhere in a dog hour or in a basement…. You might go even for small 1-2KW generators… Perhaps the will do fine as well…

If I was in the audio business then I would no doubt try to make in China some kind quiet running devise, size of the P600, that would mechanically regenerate the REAL NEW clear power....

Rerurn to Romy the Cat's Site