Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: How to USE “Resonating Oops” in loudspeakers
Post Subject: Injection Channel project is done.Posted by Romy the Cat on: 5/26/2007
Ok, the Injection Channel project is over. I dumped the boxes not heavily and very conventionally, painted them, installed the drivers and crossovers. Sure, before I put the injection channels into the Macondo frame I flipped them upside down and tried to listen the boxes with Reds full range on my floor. They sounded like typical Reds. I did not detect a lot of extra quality coming form the larger box - a little more bass but generally it is the very same sound. The sound of box, despite that it is relatively light is not auditable. As with any 10” Reds the power handling is low. As with most of the Tannoys the speaker fall apart if they play something more complex then a singer with 2 instilments. The sound is “Red” and strategically colored.
Still, as Injection Channel they should be very much OK… The idea to locate the driver at the bottom of the box was a good idea… Rerurn to Romy the Cat's Site