Rerurn to Romy the Cat's Site


In the Forum: Melquiades Amplifier
In the Thread: A resistor between screen and grid
Post Subject: The history of the Milq's Bias, Part 2.Posted by Romy the Cat on: 3/26/2007

No, I did not try to use grid chokes.  The setting for Milq was flowing: the highest voltage in the gas tube and the highest value of resistor to the grid. Frankly there is a LOT of mystery how it all works out together and how it all inflicts sound. The value of the cap after the gas tube and resistors, the location of the caps, and many other things do affect sound… Evan the type of the gas tube affect sound, not matter how bizarre it is as behind .5MOh resistor it should be absolutely irrelevant:

http://www.GoodSoundClub.com/TreeItem.aspx?PostID=2792

Pretty much how it ended up to be with Milq Bias.: we tried various approaches until we come across something that sounded as we needed and then we locked on it and did not looks at anything furthered.  Here is some history for you:

http://www.GoodSoundClub.com/TreeItem.aspx?PostID=1818

Rgs, Romy the Cat

Rerurn to Romy the Cat's Site