Rerurn to Romy the Cat's Site
In the Forum: Audio Discussions
In the Thread: Initial thoughts about new/old Lamm ML2s
Post Subject: Stick it in the ML2 input stage.Posted by Romy the Cat on: 3/24/2007
Jessie,
I think you go overly crazzy in here. The buzzing you got is from your inaccuracy of your “small clips”. A Regular divider at input should not have ant noise, regardless the resistors were used. Do not spend a lot and do not go into the craziness of ultra low noise resistors - it is absolutely unnecessary. Get 20c-30c worth Vishey-Dale RN60(CMF60) and it will be perfectly enough. You might alternately incorporate the divider into the ML2 input stages (it has own divider and a shunt cap in there) but it would require to open up the amp.
Rgs. The caT Rerurn to Romy the Cat's Site