Rerurn to Romy the Cat's Site
In the Forum: Audio Discussions
In the Thread: Initial thoughts about new/old Lamm ML2s
Post Subject: Not too far out on the limb yetPosted by Paul S on: 10/20/2006
Thanks again, Romy. I never would have guessed that the relay-like pulse comes from a dying output tube rather than a fault with the relay itself; but that does make it lots easier to deal with!
As you know, meaningful info about this amp is hard to come by, with Lamm keeping as much to himself as he can , and most owners seem happy to just follow Lamm's instructions to the letter. I guess that's the safest way.
Meanwhile, although I like to experiment I would never change anything about my my equipment unless I was reasonably certain that I was following someone who has a good idea what he's talking about.
I can read a schematic, follow instructions OK, de-solder and solder, but I do not pretend to be an electronics whiz. I am in this for the music, not for DIY itself. In fact, if I thought I could just buy what I wanted I would do it and never work on the gear! Like you said, the gear is just a means to an end, ie, tools, and I try to know the tools well enough to control my results, at least to a degree.
Best regards,
Paul SRerurn to Romy the Cat's Site