Rerurn to Romy the Cat's Site
In the Forum: Audio Discussions
In the Thread: Initial thoughts about new/old Lamm ML2s
Post Subject: Lamm ML2 is juts a tool…Posted by Romy the Cat on: 10/19/2006
There are no relays in the ML2 that might produce the “violent switch-on pulse… which threatens to blow your speaker”. What you have is a dead V2 tube. When 6C33C dies then it begging to produce the erratic pings. Juts replace the tube and you should be all set.
Anyhow, ML2 is won by many people nowadays but very few know what the have and how to use it. In fact it was always. People buy it just because the Media praises it but they both, the owner and the Media are clueless what and why the do what they do. I know at least 20-25 ML2 owners and 95% of them are complete Morons and have the corresponding sound from ML2….
Rgs,
Romy the CatPS: BTW, the less gains of the 5687 tubes has nothing to do with the less gain of the amp. You do need the driver gain to drive the output stage. Also, it a feedback amp and you will change the open loop gain with less drive of the 6C33C…. Anyhow, if you do not rally know what you do then I would not suggest you to experiment with it.Rerurn to Romy the Cat's Site