Rerurn to Romy the Cat's Site
In the Forum: Audio Discussions
In the Thread: An amplifier for Tweeters
Post Subject: T350 tweeter: almost there...Posted by Romy the Cat on: 9/28/2006
Well, it looks I’m near finding a more or less acceptable setting for the T350 tweeter. Ironically and completely accidentally it is not far form I use to be. It is still on the slope at 20Hz (since the T350 is pretty dead at 16kHz) but now it is on the third order slope. It use to be at 65kHz slope of the first odder and I was arriving at the Vitavox S2 upper knee at approximately minus 8dB. Now I am running from slightly above 20kz and I arrive to the same crossover point at minus 9dB. Since T350 can not do at it’s lower knee what S2 does (I doubt that any tweeter would – actually it is scare to hear what a well tempered S2 does at 10kHz ) then the their order I find is beneficial, and practically given the sharp S2’s decay. The time alignment is still a complicated bitch but I am near the target already, very close. What I sumized that the way in which I mounted the tweeter is very good but not good enough to set the necessary level of precision for time alignment. I will not redo the mount bracket as it would require a very sever revision of everything and I do not have a desire to dive in there. Still, I would wish I have something like this.
The caTRerurn to Romy the Cat's Site