Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: Macondo 3.0
Post Subject: Solved another problemPosted by Romy the Cat on: 7/12/2023
If you have unused full range Milq channel then it is very easy for you to test Red Twitter. Use default crossover, just open the connector to the driver and cut off the red wire that leads to base driver. Connect it out of face S2 driver and time aligned at 7k. Set on the tanoy crossover maximum high frequency output and you should be all set. You do not need any box for speaker just a bottle to align the driver and mount it to the frame. I did today the same, it certainly different sound than B3, not necessary better or worse, I need to think more about the sound. It is possible that I would go with phase constant second order of let's say 5-8 kilo cycles on red Twitter. It is incredibly musical twetyer, I just would like to take everything out of it. By the way, your post was inspiration for me to experiment today.
I also had today at huge success to addressing my mid base collapse that I described before. I went from second order to first order low pass on my mid base 15-in woofers and it made all different. For whatever reason my upper base horns do not load room properly. The amplitude is there an RTA is flat what's that emotional pressure was very not linear and was dropping. I introduced a longer the king tail of 15inch Vitavox driver overlaing with my upper bads horn. It worked magically and I truly have absolutely wonderful Midbass now. Also things are like puzzles, if topology is right you just need to pull right string...
Rerurn to Romy the Cat's Site