Rerurn to Romy the Cat's Site
In the Forum: Audio Discussions
In the Thread: It’s mad, mad, mad... electricity.
Post Subject: Dedicated Ground (again...)Posted by Paul S on: 8/16/2022
Rick, as I have chronicled at GSC, I have used a dedicated ground for my phono for many years. The Ticket seems to be to keep amp ground wires lifted, and in your case you would connect just the inverter ground wire to the dedicated ground line, and the inverter neutral wire would still go to the house service ground bus. I recommend a bare copper 12 AWG wire, and either clamp it very tightly, or (my preference) solder it to the copper ground rod (use a torch). If necessary, you can use small isolators to stand the wire off surfaces it crosses on the way to the rod.
Impose PP spacing by hitting "Enter" 3 times, rather than 2X.
Paul SRerurn to Romy the Cat's Site