Rerurn to Romy the Cat's Site


In the Forum: Audio Discussions
In the Thread: The crossovering Messiah is coming...air capacitors
Post Subject: How it might work out…Posted by Romy the Cat on: 11/24/2004

pillola cialis per uomo

cialis generico

I see, I never thought about it... If you are correct then I will not be able to say, “how it works out”. I would definably be able to say “how it sounds” in regards of a speaker-level 3uf of “Vitamin Q” vs. 30pf at line level, but I will not be able to detect the minute fluctuations of the lower cut-off with a signal. And yes, ML2 runs a global feedback…

The good part in all of this that a friend of mine after reading this post contacted me and informed that with a targeted eclectic crossover point of 3500Hz and the amps inputs of 150K I would not need a 30pF cap but 300pF.  (I always loose something while convert the things from uF to pF) If so, then perhaps it would be a little easier and I would be picking up less capacitive mess, wouldn't it be?

So, Chris, when I try it (and I fell that I’m very intrigued) then what should I watch for?

Thanks,
The caT

Rerurn to Romy the Cat's Site