Rerurn to Romy the Cat's Site
In the Forum: Melquiades Amplifier
In the Thread: R22
Post Subject: Despite the problem, I felt a sense of peace.Posted by Domidaw on: 1/2/2022
Because I feel that with your help, sooner or later I will solve this problem. So far I have been feeling very frustrated for days, so I decided to post this on the forum as a last resort. I do not know any people who know electronics construction. If I knew a person whom I could call with my problem then .... well, that person would probably change his number because I would have massacred him with my phone calls.
I'm not home until Wednesday, so there's not much I can do now. I am going to order a new transformer tomorrow. Before leaving, I checked the capacitance of the capacitors with a multimeter and they all seams ok, so they are rather functional. The photo shows the capacitor c10. Its minus is connected to ground, its plus goes to the output transformer, which is directly below it. From the transformer, the black wire goes straight to pin 4 in the socket 6c33c. The r22 resistor is a 50ohm 12w ommit, but I replaced it with this big 50ohm 20w green resistor because I could get it quickly locally.
I would like to add that I did not start building a second monoblock ...
Rerurn to Romy the Cat's Site