Rerurn to Romy the Cat's Site


In the Forum: Audio Discussions
In the Thread: It’s mad, mad, mad... electricity.
Post Subject: Im backPosted by N-set on: 4/1/2017
Paul, my system is back to the operational mode after the EMT tonearm disaster. Actually the biggest disaster was not the lost connection in one of the pins but....the bearing gave up according to my EMT tech (!!!) I must say I've never heard of a tonearm bearing giving up from a normal operation, but I was presented a convincing video with my bearing response to gentle movements and how it should look like. Mine responded like if it was filled with sand. This is actually a warning to EMT users: EMT929 can give up on its own!

So all in all, after cleaning with your method almost all of my chain (all connectors, all tube pins, etc) I ended up with a couple of new variables: my burned in Vandenhul silver litz changed to fresh Cardas + the new bearing. This obviously makes the before/after comparison senseless. All I can say is that there is no night/day difference, maybe indeed some of the HF halo is gone.

I can however comment on the physical state of Deoxited surfaces. First of all I have not seen burned deoxit anywhere, but my only tubes are small signal. Second, the surface below deoxit layer was faaaaaar from perfect to put it gently, esp on copper. It was dark with and any liquid deoxit leftovers were green from the copper corrosion.

I'm still to dismantle and clean the dedicated power panel, but first I let the new tonearm wire burn in a bit.

Cheers,
Jarek

Rerurn to Romy the Cat's Site