Rerurn to Romy the Cat's Site
In the Forum: Melquiades Amplifier
In the Thread: Planning my DSET
Post Subject: First Fullrange Melquiades power supply is done...Posted by anthony on: 2/2/2017
It looks good to me. As you can see I have left plenty of room to add a couple of more channels.
The bottom level contains the power transformers and relays. The diode bridges hang from the the middle shelf and the chokes and filters are on the top shelf. I've included a foot-pedal for on/off duties. The DC cable will connect at the top of the case, the AC cable from the front, and the captive power lead and foot-pedal to the rear of the case.
Here is the closed up case. It sits on industrial neoprene footers that at this weight rating give it isolation from about 20Hz or so, which is low enough to decouple any vibrations from the floor. Tap the PS with your toe and it wobbles about like jelly for a few seconds.
The second power supply is now under construction as are the DSET power supplies, the bottom shelf of which you can see below...
Rerurn to Romy the Cat's Site