Rerurn to Romy the Cat's Site


In the Forum: Horn-Loaded Speakers
In the Thread: Designing and building a 5 channel horn loaded (looking for directions on my way)
Post Subject: Alignment and tapped horn as my subPosted by kodomo on: 3/12/2016
fiogf49gjkf0d
Yes, when I move the drivers or for that matter if I move my listening position, I realign.

What I hear and measure about the drivers relative distances to each other is this. When I first set up the drivers, one horn ended and the next one started, there were no space in between. Actually unless I sit at 120cm high (ear height), the tweeter was below the bass horns relative to the listener. So at the end, I took the tweeter 10cm higher. Then kept the distance between tweeter and upper mid, it is ok for one to end and the other to start. I had moved my 200hz tractrix 5 cms higher and that helped the 1400jmlc and did not hurt or effect the 200hz tractrix. After doing this many small dips and small inflations in the sound pressure were gone. 

This SPL graph is without me turning on the tapped horn. I can do what you say already. I can understand what you mean by space, because since I built my tapped horn and did not compromise and built it full size, I can hear and feel that "space"

Rerurn to Romy the Cat's Site