Rerurn to Romy the Cat's Site


In the Forum: Horn-Loaded Speakers
In the Thread: Another time aligned 5-way horn project
Post Subject: You don't have to go there...Posted by anthony on: 8/27/2015
fiogf49gjkf0d
 Murataltuev wrote:
 anthony wrote:

It is a compression driver with an 8" cone.  If you want authority at 300Hz you will need diaphragm area.  The Fane Studio 8M that Romy and plenty of others use for 100Hz up to 1kHz is an 8" cone driver on a 4" throat with a closed back-chamber to make it into a compression driver, which effectively is the topology of the 2169H.
I respect others experience, but still not sure that I want to hear 8" diaphragm in 500+ range.And with 1st order crossover I'll have it.May be I'm wrong, but really...27gramm is too much. My 12" Supravox in 42Hz horn is 18g.And I also made it in closed back-chamber like compression driver.

I understand that.  You were after drivers that can do 300Hz up...well according to some the 2169H is a good one (I've not heard it).  It might bridge the gap between your 42Hz horn and your midrange.

Rerurn to Romy the Cat's Site