Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: How to USE “Resonating Oops” in loudspeakers
Post Subject: Design and implementationPosted by decoud on: 9/20/2012
fiogf49gjkf0d
Here is my suggestion:
1. Generate a flat template for an oblique cone, easily done using the free software here: http://www.tyharness.co.uk/cones/cones.htm
2. Roll a sheet of black clay, at the required thickness, and cut out the flattened cone shape.
3. Bend the sheet to form the cone.
4. Embed inserts for mounting the driver and back chamber with screws, e.g. from here (http://www.insertsdirect.com/)
5. Bake to harden.Rerurn to Romy the Cat's Site