Rerurn to Romy the Cat's Site


In the Forum: Audio Discussions
In the Thread: Constructing LF modules to the limits
Post Subject: Using modules for time alignmentPosted by oxric on: 9/24/2011
fiogf49gjkf0d
 Romy the Cat wrote:
Here is pretty much the idea that I had – a very tall line array with min footprint and with more of less corrected timing error by angling the front baffle. At the picture below the curvature of positioning of Macondo channels is not depicted (for sake of graphic simplicity) but the idea is well exposed. 



I like the idea of angling the enclosure, although I am not sure about the idea of the lowest drivers firing at the floor...I would use a series of modules each containing two tightly fit drivers which would fire parallel to the floor, and achieve a very similar approximate time alignment by positioning.

http://www.etnow.com/news/2007/10/alcons-qb363-arrayable-bass

You can find above a link to a company that offers(maybe offered I don't know) such modules and you can also see that here they have also gone for minimum spacing between the drivers.

Best regards
Rakesh

Rerurn to Romy the Cat's Site