Rerurn to Romy the Cat's Site
In the Forum: Melquiades Amplifier
In the Thread: Milq: Starting the project
Post Subject: Milq: Starting the projectPosted by Antonio J. on: 11/3/2005
how to buy naltrexone
buy naltrexone
- Regarding C2 the 2000uF/450v cap, he suggests to replace it with 5 x 200uF/200V by Mundorf (he can get them for a good price, probably better those five caps than a single 2000/450). I'm not sure about this replacement, it could change completely the sound or maybe not, but he says 450V is quite a lot and maybe not really necessary. My knowledge is 0 so advice is needed.
- C10> He suggest using three caps of the same type, the Mundorf HV 200uF/200V.
- C3 (electrocube) to be replaced for a Mundorf silver in oil 3.3 uF. In his opinion the Mundorf is the best cap for that application.
- He can't find wire-wound non inductive Vishay/Dale CW or RW resistors. He can get some other non-inductive resistors, but not exactly those. He not either can find the VR1 trimmer which he says is very "exquisite". I would be very thankful if you could address us to some reliable provider of the Vishay/dales or suitable substitutes.
- Delay Timer There's nothing specified about the circuits. He has his own design, but he doesn't know if it would meet the requirements. Hence some description or schemes about the timer's circuit are needed.
- Binding Posts = He suggests using some heavy Monacors since those are the ones he used in some other projects, but maybe you have experimented with others and find them more adequate.
- RCAs = he uses Monacors too, but maybe other make are better.
Thanks for any comments, I'm willing to have the Melquiades built and learn what it can do.
rgds
AntonioRerurn to Romy the Cat's Site