GoodSoundClub - Romy the Cat's Audio Site

In the Forum: Horn-Loaded Speakers
In the Thread: Macondo’s Midbass Project – the grown up time.

Post Subject: Got a test croosover.Posted by Romy the Cat on: 8/29/2010

After much consideration I desired to get my test crossover. I chose when for Velodyne SMS-1 that someone pitched at this site before. The unit has 6, 12, 18, 24, or 48 dB/octave low-pass filters that I need and runs up to 200Hz. I do not think that I will have higher crossover point then 200Hz. It is $400 piece and a bit more expensive but I guess I will be using it for testing of my LF channels, so I figured that it is worth to have it. Now what I need is schematic of this SMS-1. I would need to rise impedance to a half meg and most likely to tune the input and out stages as they usually are very badly done in those type of units. If someone have schematic then I would greatly appreciate it, I do not mind to pay for it.

Rerurn to Romy the Cat's Site