Rerurn to Romy the Cat's Site
In the Forum: Horn-Loaded Speakers
In the Thread: Macondo’s Midbass Project – the grown up time.
Post Subject: Nuts & bolts of assemblyPosted by jessie.dazzle on: 8/26/2010
fiogf49gjkf0d
When doing the final assembly, you might want to use Nylock type self-locking nuts:
http://www.nylocknut.com/
Looking at the images, this might require that you use slightly longer bolts (the few threads exposed beyond the existing nuts are those that start to taper to a smaller diameter and may not offer enough interference with the nylon ring of a self-locking nut).
This type of self-locking nut can be re-used.
Available at Lowes and Home Depot.
jd*Rerurn to Romy the Cat's Site