Rerurn to Romy the Cat's Site
In the Forum: Audio Discussions
In the Thread: Lamm ml2 voltage 110v to 220-240v
Post Subject: MainsPosted by Stitch on: 10/2/2009
fiogf49gjkf0d
some help from a non-republican :-)
1. the fuses you need 2- or 4 see below- and 2 spare:2A-250V /(313) slow-blow
2. Internally there are another 2 fuses:1,25A fast-act
3. Remove the bottom plate and check/replace those fuses first
4. Replace the 2 fuses in the IEC socket with changing the voltage
5. I am not up to date with mains in Norway but when you have 3 pins with ground, it can be possible that your
Amps will hum. When they do, use a power cord without connected ground.
6. Adjustment: it is written in the manual, do the first adjustment at the beginning and let it run for 6or7h and do the next adjustment.
Rerurn to Romy the Cat's Site