Rerurn to Romy the Cat's Site


In the Forum: Audio Discussions
In the Thread: Lamm ml2 voltage 110v to 220-240v
Post Subject: I void any responsibility for further actions….Posted by Romy the Cat on: 10/1/2009
fiogf49gjkf0d

 jessie.dazzle wrote:
  Make sure the power switch is off, and connect the power cord.
Unless you are a republican. If you are then you need to change voltage with power switch on and power cord attached.

 jessie.dazzle wrote:
 
If you have the original ML2s, the socket will look exactly like this:
http://hongkong01.rs-online.com/mobile/search/searchBrowseAction.html?method=getProduct&R=4655389 

In the ML2 that I used I got rid of the common mode filters behind the power entry. I felt that I did give me SOME added dynamics. It was not a lot but I thought it was auditable. I can’t confirm it now as it was 9 years back – who knows what I was thinking then. In any case the identical power entry that Lamm use with no common mode filters cost a dolor or two and whoever with might to try juts to replace one with another.

The Cat

Rerurn to Romy the Cat's Site