GoodSoundClub - Romy the Cat's Audio Site

In the Forum: Horn-Loaded Speakers
In the Thread: The absolutely “best” material for horns construction.

Post Subject: If it where up to me…Posted by Romy the Cat on: 6/28/2009

Then I would mingle with the idea of custom 50Hz horn “for the room”. John looks like stick his trapped horns, Jessie made his horn that is in a way too good to be true. I do not have room for 50Hz but if I had then I would probably experiment with something that I call a half-square horn. Any room has two walls, let say between the side walls and the floors. Those intersections (bends) between the walls and floors are a half of a horn already built. So it we have an objective of exponential 50Hz horn then we can pretend that two side of them are flat and perpendicular and we can calculate two left out walls, based the profile upon the duple exponential change of opening from the axes of the horn, that in this case will be a wall. So, all that we need to do is to construct two bendable walls and bolt them to the walls. It might be too much half ass solution but it is space saving and it might allow to take the horn 10-15 lower…

The Cat

Rerurn to Romy the Cat's Site